Couldn't you reduce the amount of steam generators (and turbines) by 2 by pumping 400 hU/t in each instead of 200?
End up like this:http://imgur.com/jvacCVIhttp://imgur.com/WXfONYW
Did save a lot of resource! (including Reactor Fluid Port, especially when short of lead)
But the Steam Generator is 6-sides-blocked, had to remove the Fluid Distributor to open its GUI.
It'd be great if Heat Conductor can be placed as a "wire" to transmit heat 
nice setup
but sure the golden golden Pipe not break you systen.. ? Gold Pipe 40mb/t 2 SteamGenerator create 2*100mB Steam/t
The gold pipe is used to transfer Distilled Water collected from Kinetic Steam Generator and Condenser.
Steam is transfered from Steam Generator -> Kinetic Steam Generator 1 -> Kinetic Steam Generator 2 -> Condenser, not through the pipe.
After hours of study, I finally came up with a design.
Reactor: http://goo.gl/GO5Bd
the reactor generates 912 Hu/s.
800 Hu/s to 4 Steam Generators running superheated steam.
112 Hu/s to Stirling Generator.
results in 656 EU/t average output.
http://i.imgur.com/zwP30QK.jpg
http://i.imgur.com/oPVgHp9.jpg
Please correct me if I done anything wrong
thanks!
my Miners use more than 1 Pipe to get down 1 level
but when drawing back the pipes (remove the drill & pipe from GUI)
it returns back 1 pipe per level
drill down: 2~3 pipe for 1 level
draw back: 1 level for 1 pipe
