Some problem about ebf: can the voltage levels between the hatches be different?
For example, is LV input hatch + MV energy hatch allowed?
Posts by macyayaya
-
-
No, two generators can output 2 Amp. In that case it is the macerator only accepting 1 Amp that slows down the turbines and keeps the cables intact. You have 2 amp for a few ticks directly after connecting the macerator until its internal buffer is full, but for cables you need about 20 ticks of overamperage for them to burn.
I change the macerator to the thermal centrifuge, and it burns!
You can manual digg down with an pickaxe, simply digging a 2x1 hole so you do not fall down into holes. To get back up use the stone you digged to get down.
Aww, that is the simplest way to do that, and I never thought about it *facepalm*
-
3. As far as I know energy is coded similar to a fluid. Energy sources generally try to "fill up" every buffer (cables, transformers and machines) and will stop outputting when everything is full.
I've never encountered a setup that would waste energy when nothing is working (apart from literally voiding energy). But it would probably better if Bloody answered that one.
Your setup should output 2amps of LV.There is a more precise picture about what I mean.
There is 2 gas turbine connect to a macerator, but the cable used is 1xtin cable.
That means the actual output is not 2A but 1A, which is pretty weird.4. I usually use a jetpack and a mining laser to drill a hole from the surface down to bedrock. Since for an area of 3x3 chunks one mix vein is generated, this finds them pretty reliably.
You could also use the seismic prospector which would also help you to find good oil and gas sources.Well, for people who are still stuck on LV stage, this is not really possible.
Anyways, thanks for the reply
Edit question: how do I get oil in the early game(before MV)?
-
Thanks everyone for answering my question, but since I am going to write an GT guide(not in english, maybe someday), I need to ask more questions xD
But some question are quite stupid though...
1.Assuming an e-net with an input 32V/1A, omitting all loss.
If I have 2 LV ore washing plant(16V) + another LV machine running on this e-net, no matter how large is your energy storage, machines will run into an not enough power error, right?
If the input changes to 32V/2A, then can the machines works continuously without an error?2.P = I x V works in GT, right?
So if loss is omitted, you can run 32(or maybe 30) ore washing plant while using an 32V/16A input, right?3.Is the battery buffer the only block that can adjust the output amperage? So the following setup does not output 2A, right?
----
........|------->----4.What might be the best way to find ores that height is below than 40, like lithium? Still caving or mine a tunnel, or any other ways?
-
"Thermal Centrifuge is 48 EU/t for 400 ticks."
So I guess that the real usage in GT LV thermal centrifuge is 24EU/t and 2A?
-
How many energy does an ore washing plant/thermal centrifuge need per operation?
An IC2 version of NEI recipe didn't help, it didn't write the eu needed -
Asking a simple question: how can I craft polyethylene in the early game?
Many assemble recipes need them, but I can't craft them without LOTS of machines(distillery, canning machine, distillation tower?)Also, some assemble recipes need fluid metals, so I need to craft a extractor before that, right?
Edit: I set up a chemical reactor and a fluid solidifier (to make rubber more efficiently), and I want to output the molten rubber to the solidifier
I tried the fluid auto-output button and a pipe connect to it, but it's not working
did I miss something?nvm I forget to use a pump -
So there is not much way to get Lv3 pickaxe on early game? Only diamond ones?
-
Is red/black granite pickaxe removed? It is shown in the listbut cannot find a way to craft it.
-
Hello Queue,
1.Can I translate the survival guide to the traditional Chinese version and republish to other forums?
I'll let you know when it's done and ready to publish.
2.I want to translate the pages about GT on the FTB wiki (to traditional Chinese too), and I want to add <translate> templates on it,
but it's not working at all, it just giving me
""This page contains changes which are not marked for translation.""
After Google, I found that I need the translate administrator to get the translate work faster
Does anyone know how to get the admin?
I'd appreciate it if anyone can tell me -
This is incredibly useful!
I don't know that I have to build a Bronze Blast Furnace until see thisBTW, can I translate this article to other languages and re-post it to other forums?
