Posts by CrazyCrafter

    Had some fun using a 555 timer to modulate 180-ish kHz square wave for audio amplification, discovered that random mosfets ripped out of dead fluorescent light ballasts require a bit more current on the base to switch to full on output than I expected. The audio on the speaker is pretty crappy, but the fact that the speaker is a 3cm-ish 1/4 watt taken from some cheap toy doesn't help :P

    Old calculations, may not be accurate


    ---------------------------------------------------------
    | Fusion Reactor Maths
    ---------------------------------------------------------


    128 ticks is 6.4 seconds
    4,000,000 ticks is 200,000 seconds
    Produces 1 He3 cell per 128 ticks
    Consumes 1 Deuterium and 1 tritium cell per 128 ticks
    requires 4096 EU/t for reaction
    1 He Plasma cell produces 8,192,000 EU at 2048 EU/t
    1 He Plasma cell burns for 4,000,000 ticks


    /---------\
    | Process |
    \---------/


    4 hydrogen per 93,000 EU and 38 seconds
    1 deuterium per 4 hydrogen at 15,000 EU and 150 seconds
    1 tritium per 4 deuterium at 15,000 EU and 150 seconds
    1 liquid transposition per 160 MJ at 4 MJ/t and 2 seconds


    /---------\
    | Results |
    \---------/


    1 tritium per 16 hydrogen
    1 reactant pair per 20 hydrogen
    Reactant pair requires 190 seconds and 465,000 EU for H
    Reactant pair requires 750 seconds and 75,000 EU for De
    Reactant pair requires 150 seconds and 15,000 EU for T
    Reactant pair requires 555,000 EU
    Reactant pair requires 320 MJ


    /---------\
    |Machienes|
    \---------/


    6.4seconds = TimeForProcess / Machienes
    Machienes = TimeForProcess / 6.4seconds


    /---------\
    | Results |
    \---------/


    30 Electrolyzers to process H from water
    118 Centrofuges to process De from H
    20 Centrofuges to process T from De
    2 plasma gens to keep reaction running
    needs 138 Centrifuges, 30 electrolyzers
    3,840 EU/t for the electrolyzers
    4,416 EU/t for the centrifuges
    8,256 EU/t total
    2 transposers to transpose liquid
    5 plasma gens needed to power machienes
    8,704 available from fusion
    175 fuel to jumpstart
    11,000 tin cells



    ---------------
    aques produces more that 6 every 38

    Greg, how about adding solar panel arrays that consist of normal blocks(not tile entity) in a rectangle with a "control" block(tile entity) somewhere inside which outputs the EU generated by the array while having a gui, say, 3 numerical displays, each one showing one of the following: EU/t, length along x-axis, length along z-axis. The tile entity would be used to scan for a valid array and output the EU while the fact that the majority of the array was "normal blocks" would reduce the amount of resources required to process the whole thing. It could be slightly more efficient than normal solar panels, while costing the same amount of resources

    :P

    Greg, how about adding solar panel arrays that consist of normal blocks(not tile entity) in a rectangle with a "control" block(tile entity) somewhere inside which outputs the EU generated by the array while having a gui, say, 3 numerical displays, each one showing one of the following: EU/t, length along x-axis, length along z-axis. The tile entity would be used to scan for a valid array and output the EU while the fact that the majority of the array was "normal blocks" would reduce the amount of resources required to process the whole thing. It could be slightly more efficient than normal solar panels, while costing the same amount of resources


    That may be a job for Iguana Tweaks, he added a wieght system too I think.
    ;http://www.minecraftforum.net/…ana-tweaks/#entry24265138

    Feel free to suggest it there then, I don't have a MC forum account and don't plan on ever making one :)


    Edit: I just figured that greg might want to add it to gregtech, seeing as he is always looking for ways to make MC harder

    You know what would actually make minecraft harder? Block Placement Time. Want to plop a block of dirt down? 10 ticks. Want to put down a piece of cobble?7 ticks. Want to put down and IBF? 25 ticks. Now, planning before placing blocks is a must! It will be GREGLORIOUS!1!!1!
    But really, This might make the difference between plopping down a dirt wall and actually planning before entering a wide open cave when you hear skeletons.

    Quoted from "CrazyCrafter"
    Quoted from "SpwnX"
    Another thing is that whenever the electric connections of a house are directly connected (like putting a wire connecting the two holes of the plug [or when someone somehow makes that connection, while being the "wire"]), the current is too high and will deactivate the energy supply through a device which i don't remember its translation.
    The only issue with depending on (circuit breakers/ fuses) for safety is that they aren't instantaneous, and cannot protect humans shorting the wires from cardiac arrest or brain damage because they don't always trip quickly enough. Also note that human resistance to AC (really impedance, but that's because the skin acts as a dielectric(making the body behave as a capacitor when subjected to AC)) is only 300-1000 ohms, which means that for 120V the instantaneous current ranges from 400 mA to 120 mA, which is more than enough to cause cardiac arrest, but not nearly enough to guarantee that a breaker trips.
    I think you are mixing leakage protection (RCD or ELCB) with circuit breaker / fuse.

    Unfortunately, most homes in america lack RCD or ELCB devices for the majority of their circuits, and they are only required for areas which commonly contain water, such as bathrooms or the outdoors. I was referring to breakers/fuses when I said that they wouldn't trip, and leakage protection is a non-factor because the original situation was regarding using 2 wires poked into the "hot" and "neutral"(not ground) terminals in an outlet to charge a phone, which wouldn't cause an RCD or ELCB to trip because nothing actually leaks to ground. Also, the major hazard would be overheating of whatever you tried to connect to the 120V grid if you were smart enough to use insulated wire.

    Another thing is that whenever the electric connections of a house are directly connected (like putting a wire connecting the two holes of the plug [or when someone somehow makes that connection, while being the "wire"]), the current is too high and will deactivate the energy supply through a device which i don't remember its translation.

    The only issue with depending on (circuit breakers/ fuses) for safety is that they aren't instantaneous, and cannot protect humans shorting the wires from cardiac arrest or brain damage because they don't always trip quickly enough. Also note that human resistance to AC (really impedance, but that's because the skin acts as a dielectric(making the body behave as a capacitor when subjected to AC)) is only 300-1000 ohms, which means that for 120V the instantaneous current ranges from 400 mA to 120 mA, which is more than enough to cause cardiac arrest, but not nearly enough to guarantee that a breaker trips.

    It's better safe than sorry, especially with electricity. Do remember that lith-ion batteries are explosive and flammable, which makes things involving them even more !FUN!