Posts by Nexans20

Quote from Rokiyo

All the storage devices wait until they have enough power to send a full pulse.


This is what will be happening on each tick:

• First MFSU reaches 500eu. Nothing else happens.
• First MFSU reaches 1000eu. It sends 512eu down the line. Now your first MFSU has 488eu, your second has 512eu
• First MFSU reaches 988eu. It sends 512eu, leaving 476eu.
• First MFSU reaches 976eu. It send 512eu, leaving 464eu.

You can see the pattern here. Every 42 ticks or so, your first MFSU wont send a pulse.


EDIT: Oops, seems you're generating 510 instead of 500. Your first MFSU will only skip a tick once every 256 pulses.

Display More

ok ty for ur answer

So I checked buglist didn't see this one there my setup as u see, generates 510 EU/t entering the MFSU.
I have another MFSU at the output ( for testing reasons) So as you see on picture nr 2 , there is 512 EU/t exiting.

Now the strange part is that ( in picture 3 and 4 ) that the EU of the 1st MFSU still increases. which shouldn't be possible right ?

ty all for ur answer my reactors r wired to MFSU with 4x HV wiring which goes up 4 blocks into MFSU's which are wired with fiber cables to the next stage and so on.

I have a problem with the nuclear power thingy.

i use this as a setup : http://test.vendaria.net/index…HCCUUCCCCHHCCHCCCCHCCHHCC

with air around.

and it should get 40 EU/t
though when i measure it ingame i only get 3 EU/t

what is up with that ?
ty in adv