saberboy117's reactors MK I, II, III [NEW Breeder Air cooled]

    All of my reactors need water cooling.


    Mark I-O-ED
    Efficency: 1.8
    Eu/t: 45
    Items:
    26 Heat dispensors
    23 Cooling cells
    5 Uranium cells
    Design



    Mark II-E-ED
    Efficency: 1.67
    Eu/t: 50
    Can run 22 consequtive cycles before needing to cool down
    can run almost double that but it would evaporate water after 22 cycles.
    Running time: 220000 ticks
    Cooling time: 3500 ticks
    Items:
    26 Heat dispensors
    22 Cooling cells
    6 Uranium cells
    Design


    Mark III-EB
    Efficency: 3.29
    Eu/t: 115
    Running time: 1750 ticks
    Cooling time: 3750 ticks
    Items:
    17 Heat dispensers
    31 Cooling cells
    7 Uranium cells
    Design



    Breeder.
    for those of us with slower computers, nargons breeders water cooling can be laggy(constant water recalcs), so instead of having to put up with that, I present to you an air cooled breeder! it is perfect (0 heat loss/gain) and will recharge 3 cells of one!
    Items:
    25 cooling Cells
    1 uranium cell
    3 depleted cells
    10 heat dispensors.
    Design

    You use way too many heat dispensers, you're losing cooling. The key is to resource as many cooling cells as you can while using the heat dispensers to reach them all.


    I took your first design and modified it (heavily)


    If I spent more than 2 minutes on it I could come up with something better, but basically. This design should help you understand how to use dispensers better.


    http://test.vendaria.net/index…HCUCHUCHCUCCHCUCHUCCHCCHC


    It puts out 70 EU/T and only has to cooldown once every 18 cycles or so. Focus on using more Coolant cells and less dispensers, it'll help your designs.