this uses RP2
this is my ice reactor design http://www.talonfiremage.pwp.b…=1l10101001511521s1r11r10
you pump 5 ice a second into it
you have 1 snow man over 2 block breakers then the snow goes to 4 sig compressors
the ice from the compressors gos into a buffer chest and then into the reactor at 5 per 0.80 seconds
the fail safe switch is the item detector hooked to a timer and a toggle switch
it does the same job as if no ice goes into the reactor in 20 seconds then it will switch off
bad things:
you have to reset after you reload chunks
uses alot of uranium.
also you may get a back log of ice/snow but you can fix it by messing with timers
any questions or suggestions post below