Cheap, Instant, Cold start breeder

http://www.talonfiremage.pwp.b…bxg21ccqwczw9hb4is9r5xpfk

All externally cooled. No internal components needed. Put in five lava buckets to get the temp to 10,000~ and you are ready to go.

You can have a temperature sensor trigger a piston to let in extra water to add cooling just in case something happens.

This is untested, and purely theoretical.

I built it in-game and it does work.

It is a 6 chamber reactor
I have the reactor centered on a 3x3 open space, with the bottom reactor chamber is resting on the ground. I have a 3x3 area about 10 blocks or so above the floor with 9 water sources. I built some walls around to keep the water from spilling out or getting onto the redstone. With 1 uranium and 2 isotope adjacent, and water flowing around it, It has 1 net extra cooling. So I placed a dirt block in one of the bottom corners to completely equalize heating and cooling. The temperature monitor holds a steady number indefinitely. To Cold start it, I placed 2 extra isotope cores next to the uranium until the temperature reached just over 1,100. I then removed them and find tuned the temp down really close to 1,100 by removing and replacing that dirt block in the corner. Then I added 4 lava buckets to bring the temperature up by 8,000 . This put me right at 9,100. I have it staying right at 9,105 at the moment.
It looks like I will be able to produce 4 recharged uranium cells for every one spent. It looks like they will be done enriching in about half a cycle. The planning program says It should be ticking at -4 per isotope, but in-game, they are both ticking at -2. Maybe I am misinterpreting the numbers on the planner.

I plan to build a 2nd Reactor room for the main power generator. This thing only makes a measley 10 eu/t, which is barely enough to run 3 machines. Its still better than burning coal.

I think I will automate the corner block with a piston, so I can fine tune the temperature with the flip of a switch.

Here is a short tour video of the reactor.