Posts by Maldenur

  • Functional model of the Chernobyl power plant

    Quote from baturinsky

    You just need to make a machine that "recharge" coolant cells, using water.


    Understand you. if used for cooling Hydration Cells and Cooling Cells, the reactor becomes stable, the temperature does not change and disappears risk of an accident and to control it.
    This process makes the unrealistic cooling reactor control station for my model.
    There is no need: emergency control system, control system supply cooling and so on ...



    If a method of cooling a bucket of water, and not Hydration Cells and Cooling Cells, the reactor always be in a superheated state. For this and created a management system to ensure uninterrupted water supply to the reactor, which would it keep critical condition. This gives the plant is realized by giving the ability to create a realistic model of the foreign and functional.



    That's why I'm asking how to keep the old method of cooling in 1.106 and in future updates.

  • Functional model of the Chernobyl power plant

    Quote from Mister_Omega


    CASUCs were an unintended side effect of some rather ingenious players who figured out loopholes in the system. Although, I really wouldn't mind a config option that would alter reactor behaviour between the CASUC of old IC2 and the new reactors; but like mcmz4e said (don't mind if I paraphrase a little), the chances that the IC2 devs would bring back the CASUCs are zero at best.

    I do not expect that the developers will change back. I could do it myself, or anyone else who knows JAVA. I do not think that this will have to reprogram all of the code, but just to make a change in a particular place. Or am I wrong? :)

  • Functional model of the Chernobyl power plant

    Quote from Thepowdertoy +Bleach

    1. Change nuclear reactor code inside IC2 to use old code, which have single use coolant

    I correctly understood you? it is possible to copy a code from IC2 1.103 and to replace it in IC2 1.106?
    If so, which code and where it to be?


    Now I build the third power unit. The design of this reactor will be realistichny and it is more difficult, but cooling should remain same.




    There is one more problem, the reactor in the new version should be included, and was on the contrary earlier that it would cease to work, it was necessary to activate it red stone. Whether probably most to change it in a code who be knows? For me it too important point.

  • Functional model of the Chernobyl power plant

    Sorry for my bad english, I'm from Russia, so there can be errors in the text. I want to show my project operating nuclear power plant on a prototype Cherobylskoy Nuclear Power Plant. Here I have a complex, but not yet completed.
    Tried to make the similarity is not only visual, but also functional, the use of different mods.
    The basis used IC2, also used mods: RP2, BuildCraft, BCIC2crossover , ComputerCraft, BucketFiller, Railcraft_Client, WirelessRedstone, Train mod, IC2NuclearControl, additionalpipes


    The reactor is cooled by an uninterrupted supply bucket of water. Empty buckets coming out of the reactor again filled with water and fed back into the reactor.The reactor is always running at high temperatures, so you always want to control the process flow in the room "block control panel". This all made for a more realistic look.


    Now using version MineCraft 1.2.5.


    After the upgrade to version IC2 1.106 mod problem, the work of the reactor changed and under my model station, he does not fit.. Now the reactor does not take to cool and ice buckets. For my model is an important point.


    Is it possible that a return to the old principle of the reactor?(that the reactor would take a bucket of water and ice.)


    where you can modify the code or ...?



    http://www.youtube.com/watch?v=TiRZQP3MDnQ


    http://www.youtube.com/watch?v=RJ-drtng4o0


    http://www.youtube.com/watch?v=olrbUJVwx3k