Posts by Maldenur

Quote from MatLaPatate

That was in IC2 from MC 1.7.4 Beta to MC official. And it ended into the ability to get 1200/1800 EU with little work from one reactor, without components but Buckets and RP2 stuff.

Btw, I'd like to point out that, as of the Cooling system, IC2 is more realistic than what you suggest, assuming Coolants cells = primary circuit and Water to steam = second circuit. I'd just like the secondary circuit to cool down the Cooling Cells ^^.

yes you are right
I see realism that must cool the reactor liquid components: a reactor consumes fluid or components thereof to recover from the liquid
Only liquid components should be spent

Now, to restore part of the reactor, it is necessary to use materials
So, when the reactor spent different materials and not liquid

Quote from MatLaPatate

Just make a reactor in which each Nuclear Fuel have one or more adjacent Cooling Cell (at least with GT, dunno if it buffed Cooling Cells or not), then apart from that put as many Fuel Cells as you want, and use some others reactors with Components Heat Vent in to cool your cells down. Just switch your reactor off when it hasn't enough Cooling Cells. This is not OP, so a lot more expensive, but it works well.

I need that would be used in the cooling process (expended) water not spent components.
Reactor input cell with water(or bucket water) - reactor cooling - output empty cell( or empty bucket)

I need a realistic cooling process

and how to do it?

Quote from MatLaPatate

And you basically can do this, you'll just need to cool the Cooling Cells down before they melt .

yes, I need it.
It is necessary that expended only for cooling water.
Is there no way to add such a possibility?

I have built a large nuclear power plant.
because of this all the stops and no one can help

Quote from MatLaPatate

Basically you want CASUC back ? They were removed for their OPness you know ?
Anyway, who know what will happen with IC2 experimental ?

Please respond who can help.

Need a very simple addon.
Will provide an opportunity to add to the reactor for cooling cell with water.

> (-250 Heat >

Really want to, cry for help! Who can help, please respond.

Quote from MatLaPatate

Agreed. I want reactors not to be automatable, so you have to play with the GUI (because it's fun ^^) and to keep surveilling it. Of course this would also mean it would increase both efficiency and output alot.

I propose to add:
1 molten reactor fuel (accident) - Radioactive lava with the fuel burns through the surface. You can put out a special solution. Turns into a frozen radioactive residues.
2 spent fuel - radioactive, needs to be cooled and stored in special containers. In need of disposal.
3 molten salt - in the reactor become radioactive and in need of disposal.

I can give a detailed idea

Quote from Epic Lulz

In that case, enable Steam Reactors. You need Railcraft though.

GregTech will be adding Molten Salt Reactors soon too.

where this can be found? how would this work?
in this case it would be spent? or will the circulation?

Quote from Slye_Fox

He's referring to how real Nuclear Reactors are actually steam generators.
The fissionable material is put into water that causes it to boil and release steam, this steam is sent through turbines which create the electricity, then the steam goes into the cooling towers to condense and go through the cycle again.

what is it "si fi"? This is mod? something I do not understand you.

Quote from chaoschamp

anyway ic2 reactors are si fi based

more details pls?

If you watch the video, you will understand my idea.
http://www.youtube.com/watch?v=olrbUJVwx3k

I do not need a stable reactor was I needed to speed, ceaselessly adding to the reactor coolant. Need danger!

I need to spend ONLY a cooling water. > > included with the water came out empty(cells, bucket...)

Quote from Epic Lulz

CASUCs were removed in 1.106 intentionally as they are too easy and exploitable. The new alternatives are:

I know that.

Do not know much English, sorry for my bad english!
I have for a long time to model nuclear power plant, using the IC mod from version 1.43, spent a lot of time and effort. In my project is crucial reactor cooling technology using a bucket of water and ice. This was possible in older versions of IC.
Since version 1.106 is removed. So I can not upgrade to the latest version of the mod, and use the full potential.
I ask you to help in solving important for me problems!! As of version 1.115.207 add the ability to cool the reactor buckets with water and ice or give a clue how to do it.!

I will be very grateful!!!

Quote from MatLaPatate

Nope. More like way of storing Heat/using this Heat to produce electricity. It's definitely not a "coolant" as it's not something that is heat-conductive (if so, it wouldn't be as a way of storing heat )

http://en.wikipedia.org/wiki/Liquid_metal_cooled_reactor

Quote from MatLaPatate

I think I've already seen that, aren't you guys ?

where this topic have you seen? I write this topic the first time

Quote from Viper8797

This seems pretty useless, if even usefull at all, you didnt even explained correctly what this is.

I agree, I find it difficult to Express clear, but I'll try

Quote from MatLaPatate

I think I've already seen that, aren't you guys ?

It was such a theme?

Would like to get feedback on my idea.

The new elements of the mod:

1 Nuclear pile(NP)

2 Green lava

3 heat exchanger

4 the fuel-the mass

5 Liquid sodium

6 Liquid sodium (green)

7 the Green liquid

8 Turbine (available in Railcraft or produce the like)

Green Chapter:

It melt fuel. Has the properties of usual lava, but green. Near the blocks
become toxic(like ICBM mod). Explodes on contact with water (the explosion as
dynamite). The property is burn units, in addition to stone and even some. Cool
you can only liquid sodium. During cooling turns into poison “green pack”
(fuel-mass)

Nuclear pile(NP)

NP allocates only thermal energy.

You can make it so that it fits fuel Assembly
If the car overheats, NP melts near blocks and makes a poisonous atmosphere (as
with the explosion of the reactor in the IC2 1.106).

At the critical temperature, NP melts and turns into a green lava.

Cooling NP using heat transfer medium: water or liquid sodium.

The coolant water:

Passing one time through the NP, turns into a green liquid and becomes toxic
properties. At the outlet of the NP green fluid gets temperature (equivalent to
the energy). The higher the temperature, the faster it goes down the tube.

The coolant liquid sodium:

Has the same properties as water. Different thermal conductivity.

The unit heat exchanger.

In this unit, the water turns into steam, when a device is the coolant from the
NP, steam takes the temperature, with which your carrier. The medium is
impossible to get energy in the turbine. To do this you need a heat exchanger.
In him is served heat carrier (with the temperature of NP) and goes back to
zero temperature. Passing through the NP coolant become poisonous. On the other
hand is fed into the heat exchanger is water and comes in the form of a pair
assigned to a temperature of the coolant.

Temperature affects the amount of energy turbines.

Sorry for my bad English. Translating Google
translator

Quote from RockRaiderZulu

You are describing a type that is no longer in any real use, fast reactors. Ones that are in use or in devolpement are: boiling water reactors, pressurized water reactors, molten salt reactors, pebble bed piles, and advanced gas cooled reactors.

Here's a link of this type reactor.
http://en.wikipedia.org/wiki/RBMK

be refined: (Russian to English using Google translate, I hope a good translation)

1 Nuclear pile(NP)
2 Green lava
3 Separator
4 Топливосодержащая the mass of the fuel-the mass
5 Liquid sodium
6 Liquid sodium (green)
7 the Green liquid
8 Turbine (available in Railcraft or produce the like)

Green Chapter:
It melt fuel. Has the properties of usual lava, but green. Near the blocks become poisonous. Explodes on contact with water (the explosion as dynamite). The property is burn units, in addition to stone and even some. Cool you can only liquid sodium. During cooling turns into poison “green pack” (fuel-mass)
Nuclear pile(NP)
NP allocates only thermal energy.
If the car overheats, NP melts near blocks and makes a poisonous atmosphere. At the critical temperature, NP melts and turns into a green lava.
Cooling NP using heat transfer medium: water or liquid sodium.
The coolant water:
Passing one time through the NP, turns into a green liquid and becomes toxic properties. At the outlet of the NP green fluid gets temperature (equivalent to the energy). The higher the temperature, the faster it goes down the tube.
The coolant liquid sodium:
Has the same properties as water. Different thermal conductivity.
Unit separator.
In this unit, the water turns into steam, when a device is the coolant from the NP, steam takes the temperature, with which your carrier. The medium is impossible to get energy in the turbine. To do this you need a separator. In him is served heat carrier (with acquired parameters from NP) and goes back to the zero value of the pressure and heat. On the other hand is served in the water and comes in the form of vapour from the assigned parameters of the heat-carrier.
Temperature affects the amount of energy turbines.
Pressure effect on the speed of the passage of the pipes.

I would like to describe how I would like to see the
use of nuclear energy.

To do this, there are elements:

1 Nuclear pile (NP)

2 Green
lava

3 Separator

4 Fuel-mass

5 Liquid sodium

6 Liquid sodium (green)

7 Green liquid

8 Turbine ( Railcraft or create similar)

Green lava:

This molten fuel. Has the usual properties of lava,
only green. Next blocks are poisonous. Explodes on contact with water
(explosion of dynamite).

Cool only liquid sodium. At cooling becomes toxic
"green block" (fuel-mass)

Nuclear pile (NP)

NP only emits heat.

NP melts when overheated near the blocks and make
poisonous atmosphere. At the critical temperature NP melts and turns into a
green lava.

NP cooling using heat-transfer liquid: water or liquid
sodium

heat-transfer liquidvoda:

out of the NP into a "green liquid",
acquiring properties: it becomes poisonous, gets pressure (speed) and
temperature (energy).

heat-transfer liquid sodium Likud:

out of the NP into a "green sodium",
acquiring properties: it becomes poisonous, gets pressure (speed) and
temperature (energy).

Separator unit.

Of heat-transfer Likud can not get the energy of the
turbine. For this you need a separator. It is fed heat-transfer Likud (with
acquired parameters of NP) and comes back with zero pressure and heat. On the
other side of the water is fed into the separator and comes in the form of
steam, with the assigned parameters of the heat-transfer liquid.