Posts by skavier470

i don't want to upra(de)grade to this shiny windows 8 design,

my Mfsu doesnt need a integrated NR for better usability.
also it improves next to nothing in eu output or safety.

HAYO CORP:

We made a new High Eu Output Reaktor with fairly low Running costs of about
14.40UU
Mk-1-EA-4.33 The maintance free

also I noticed that one of my designes got featured by Direwolf20 in his letsplay series, thanks for that Direwolf

Edit: fixed the link

yes, it is a Mk-2 it has cooldown, the planner calculate with it apparently...
nice feature i would say

http://www.talonfiremage.pwp.b…7zc02evif495e8fdaq72qxbyj

more gold
less tin
less bronze
less iron
more copper
cells charged: 35.2

made another one
http://www.talonfiremage.pwp.b…ys6rlk4pho62cvx2ko6w3sf4m

less copper
less tin
less iron
more gold
no glass
less rubber
less redstone
no diamonds

not realy,
just remember:
Reactor has Heat Capacity
Uranium prodruces Heat, (all values for how much are in sticky, or in my thread)
Vents Remove Heat
Switches move Heat around in the reactor
Cooling Cells store heat

now you have to move the Heat away from the Uranium Cells or Hull to the cooling Vents.
with the reactor planner it is realy easy to play around and look what is happening.

yes no cooling with ice or water any more

Sorry to disappoint you but the LHZ don’t suck up all heat they get over a whole cycle...
Yours will probably blow after a few minutes, and then your reactor goes boom.
Also efficiency wise it is bad, look in my thread for the Reactor with the highest output.

You seem to have a bad knowledge of the new reactor system, I suggest you to look at the wiki for details how reactors work now.

Quote from RawCode

FenixR HEIL GRAMMA.

Fixed.

i support this

Always annoying if you forgot to change the chest armor slot before the power is drained out.
also it would only save time as you can use a drill to mine Diamnonds even if it is empty, it only take a time.

when you look at a reactor design someone made,
copy the Url.
and click on paste at your reaktor planner..

same goes other way around...

http://www.talonfiremage.pwp.b…gs0ia5zoz37m7k9yt3k9d8ihn
your lava cells are useless...
also WHY do you need that much advanced Heat dispensers?

edit reworked reactor

Quote from Rick

/facepalm xd

it definitly a mk1, it wont melt nothing.

i tested it with magic and stuff.

richardG you are drunk, go home

since it is a mk1 it shouldnt go any way boom...

a better "Loss Free" version of my reactor would using coolant cells and cooling reaktors to cool them.
with aoutomated shutdown after one cell is about to melt and such.
i aggree that my reaktor isnt very practicle , it just an engeeniereng blueprint to play around. note: for now it is the MAXIMUM output of a reaktor that will do a full cycle....

Basicly like many already mentioned the Heat Condenser are only usefull as last resort to distribute heat cause you can do the same thing Coolant cells just on the long run more cost efficient.

also there where somewhere very well made posts about making timers using batboxes and the e-net.

when you want to know how much lapis its cost to run a cycle:
9 lapis = 4 UU
1uu=1000000eu/166000eu(with scrap)
so one lapis is at 440.000eu
or 73777eu
rest is yours...

yes my reaktors will melt after 4 seconds without cooling.
BUT they are not supposed to be running while the cooling is changed....
yours are.

about OC vents yes they will make 32 heat dissapear but also will draw 36 heat from hull, so after some time it can be that these vents melt.
i made a little setup that is neutral and will suck up all heat it can but will never melt. giving 80 cooling at 2x4 square

so why does it explode then?
there shouldnt be any difference...

1. Maybe you should read more carefully too:

Quote from skavier470

When you want to have a safe CRCS with cooldown if one of the LHZ gets full and your system isn’t fast enough:
http://www.talonfiremage.pwp.b…4w2hjwalcz8pu25i9irc3fsao

If you want to cool down some of the heat, so it won’t cost you that much Lapis.
There is somewhere a good design, can’t find it now.

The problem is that all the heat from the uranium gets stored first in the LHZ and after they are dead, then the reactor will heat up and your cooling will start to work...
also if enough heat is in the hull the cooling will melt cause the OC vents will pull more than thy can cool...

Display More

2. AGAIN ALL numbers you want are in the Reactor planner.

3. Let’s take a look at the worst case scenario:
All LHZ are empty and need to be changed.
How long will it take to replace all cells?
1. Design will explode after 5 seconds without LHZs.
2. 6 seconds (just because you got enough Heatplatings, if it doesn’t explode it will melt the cooling cells and then explode)
3. Will explode in less than 2 seconds. Also the cooling system is way too weak to compensate the heat.

Don’t use OC heat vents if they aren’t fully covered with component heat vents...

PS: if you want the maximum CRCS:
I already did one with more output better off:
http://www.talonfiremage.pwp.b…u26e47a4hkquio6n0ugjjho8w

Look in my thread for well-planned reactor designs (CRCS and these cases work the same just with different coolant)
You can also calculate the time the reactor needs to fill a LHZ, after this time the reactor will auto shutdown to let the swapping mechanism do the work. NO HEAT inside reactor.
HAYO CORP: Nuclear Power (FREE: Reactor Blueprints)

PSS: for your latest reaktor just make a automated shutdown before the LHZ are emtpy and then your logi pipes will excahnge them with no problem....

you got the right java for your system?
when you have 64bit you need the 64 bit version.
also try the java runtime envrioment

double click the jar (standalone)

maybe try a diffrent browser

here:

until the reaktor system changes or i have some more ideas i will pause the development of new reaktors.

ok tell me the numbers you want
I still don’t get which you want,
I will apologies then.

Also with the new breeders the cooling system needs to be very optimized to the Reactor,
You can’t just swap reactors, sometimes the cooling isn’t enough and you have to make some changes.

Also looking at your blueprint
I can tell that you are not very experienced with the new reactor system.

The cooling you have provided will do nothing unless you remove one of the LHZ from the uranium.
Also it is a great waste of copper with that.

When you want to have a safe CRCS with cooldown if one of the LHZ get full and your system isn’t fast enough:
http://www.talonfiremage.pwp.b…4w2hjwalcz8pu25i9irc3fsao

if you want to cooldown some of the heat, so it won’t cost you that much Lapis.
there is somewhere a good design, can’t find it now.

the problme is that all the heat from the uranium gets stored first in the LHZ and after they are dead, then the reaktor will heat up and your cooling will start to work...
also if enough heat is in the hull the cooling will melt cause the OC vents will pull more then thy can cool...

what numbers?
the cooling wont cool anything
and you need to replace the LSZ about 33 times

all is included in the reaktor planner.
just play a little bit more with it and you will know.