Posts by Elitetung

could you add grass blocks to the camo upgrade list? like the ones makeable through the mass fab

what exactly is the penalty on lack of watercooling?

i want to shield a really large object but alot of the shields are limited to a very tiny radius like the tube could do with the ability to modify both its dimensions so i can have a really long tube that is more easily shaped to fit my goals and long enough for the more advanced ideas 20 for a tube seems short in all respects

i used the eu meter on both ends of the transformers wires not the transformer itself and the reading was 256 on both sides

it seems swapping the mass fab to a mv transformer instead of direct line raised its output to 256eu solar array is only producing around 300eu atm so not going to experiment further at this point

ok i think i figured it out it seems when there is any drain at all on the mfes the output on the mass fab drops to 78 even when they only require smaller amounts

so i want a central power system but is there a way to make my mfes only draw when they are depleted or a different resolution

so i cut the cables on the mfsu and now its suddenly outputting at 512 no idea why

ok well its solars in the top of mfsu then from bottom of mfsu is glass fibre splitting 3 ways 1 path going straight into mass fab other 2 sides into mfes and as said before 7 mil in reserve -sidenote cable length is around 20 not sure exact count and forgot to mention no redstone at all - edit edit edit forgot also i did a power test on the middle wire splitting 3 ways 121 outputting out of its 512 potential 78 going to mass fab

i have my mass fabricator hooked up to a mfsu that is also hooked up to 2 mv transformers and 2 full mfes the mfsu has 7 mil energy in reserve yet the mass fab is only drawing 78eu/t can anyone explain this?

as long as it does not require constant parts it will not make the system obsolete a constant use of resources would probably make the system unused a cleaning of panels seems within reason just means you cant set your array in a strange location with no access