Awesome, thanks a lot for the info! I'll try to troubleshoot the mods a little and see if I can find the culprit. The gravestone mod is on my shortlist for being replaced anyhow so I'll start there.
So, thanks again for taking the time to check the logs! :))
Posts by Cablemonger
-
-
Hi,
just did a quick sampling on SSP (same symptoms was with SMP with server on dedicated pc):
http://www.filedropper.com/sspsample
- I fought some zombies, ran down to lv11, ran along a mineshaft, went to the nether, came back up, went flying with jetpack and then with paraglider (pretty fast moving forward) and the 'glided' back to base after 300m or so
http://www.filedropper.com/sspsimple - this second sample is pretty close to the first (but without the fighting in the beginning) but I disabled all the fancy Java options (hence the filename ..simple) I had in the profile because I suspected that they might be the culprit (which seems not to be the case).
I hope the samples help with the profiling. If not, please tell me what I can do to help (longer sampling time? different (mod) config?).
Cheers,Cablemonger
-
I get a crash when trying shaders mod together with fastcraft. I've tried different versions of the shaders mod from .20 up, it did not work unfortunately.
Ingame, it produces a pretty nice fps boost but also introduces some kind of occasional microstuttering when, for example when running along a mineshaft. It is like you move 2-3 meters forward and then get 'teleported' 1m back which repeats every second or so. I am running a server on an older dedicated PC in the same network.
I have not quite yet found out what the cause of it is. It seems to get a little bit better over time, when staying at the homebase for a while for example. Any ideas on how to remedy this?Apart from that, awesome work (FPS boost FTW xD)!!
-
Hi,
I am using CW 1.0.1.3 on MC 1.5.2 (SMP) and have problems getting them to work. In the config the "likeIC2" option is set to false.
The 8 EU/t windmills are working fine but I can't get to work the bigger ones. For now I have the 32 EU/t one and I can't get it to output any EU through cables. I tried every transformer, every cable above and including copper and an MFE and a Batbox (with transformers before it) and both wooden and carbon rotors. The GUI says it is outputting between 20 and 32 EU/t (fluctuating) but no EU comes out. Any suggestions what I might be doing wrong?
Cheers,
IC2Fb