I have restarted with a new world and new mods. I now have
ender storage, Project RED, applied energistics, compact solars, and
forestry. in addition to IC2 EXP and BC along with Nuclear Control 2.
The Plan is to make a self contained facility that houses 6 Quad cell reactors(2 MOX) that is stable, with high power generation:
-Two reactors are LZH Quad Cell reactors using applied energetics to fuel and repair/replace LZH Coolant cells.
-Two are either the same as the LZH OR 5x5x5 that uses 28 (2800 Mb/t hot
coolant if my math is correct) fluid ports to accommodate the refueling
cycle using project red. I will use the new reactors if combined power
generation is an increase from the best LZH one you can come up with.
-Two Neutral Heat HOT MOX Reactors with power generation that is greater than LZH.
- A small space factory system for efficient quad Uranium production (Powered By HV Solars on top of building)
- A small space factory system for efficient quad MOX production (powered by HV solars on top of building)
- HV Solar Backup Generator/Mass Fab replicate Uranium and Lapis (HV Solars)
- All control rooms on second floor of front building using nuclear
control and Project red to control and refuel the reactors remotely
- All reactors will have local access points inside containment chamber consisting of two layers of reinforced stone
- Alarm system
Please Help. Things with IC2 have become a little too complicated for me. it used to be ICE/Water Buckets=Coolant for a reactor which at least made partial sense. Now with a dry reactor you MUST use RZH and or LZH to at least be a little more renewable in power generation without the sacrifice of the EU/t.
EDIT:
I JUST FOUND THIS OUT----
Only LZH can be recharged by Lapis dust around the dead one. can only be autocrafted in the advanced table from BC.
New Requirements:
ME Network for each reactor MUST:
- extract depleted LZH Coolant cells and depleted uranium cells.
- exported to 3 advanced crafting tables and then imported back into the ME Network.
- put into the reactor LZH Coolant cells when reactor is on when needed and new uranium cells when it is off in refueling cycle.
- Notify in each control room how many uranium cells or MOX cells are ready for the reactor at any given time.
ME Network in re-enriching and standard cell production must:
- create all items using the best way possible.
- using the shortcut autocrafting function with the IC2 machines to minimize space and avoid using space hogging BC pipes and product loss from overflow of items.