First selfmade design MK II-1 EC Reactor
-
One cooling cell not even used, also designs like this was posted very frequently, i guess lets move on to CASUC reactors.
Tho theme of self sufficient reactors was completed by few people which sure know how to plan reactor. -
x.x Keep practicing.
My own design for that used 8 IHDs, 3 uranium in a row middle of the second row, and the rest was cooling. The IHDs were stacked in a <> kind of pattern along the sides of the reactor (a column in the center and two on each side).
A -better- design for that is the one that uses 1 less IHD than mine, replacing it with hull-plating. It used a column of three in the middle almost at the top; plating above that, and then fit in as many IHD+3 cooling cells as possible.
-
x.x Keep practicing.
My own design for that used 8 IHDs, 3 uranium in a row middle of the second row, and the rest was cooling. The IHDs were stacked in a <> kind of pattern along the sides of the reactor (a column in the center and two on each side).
A -better- design for that is the one that uses 1 less IHD than mine, replacing it with hull-plating. It used a column of three in the middle almost at the top; plating above that, and then fit in as many IHD+3 cooling cells as possible.
http://www.talonfiremage.pwp.b…=1o1010100120101021e01r13
http://www.talonfiremage.pwp.b…=1o1010100120101021e01r13These are the reactors he's talking about
Oddly Talon's planner considers the second a MK 2 (barely) -
This is my design:
http://www.talonfiremage.pwp.b…=1o1010100120101021e01r10Edit:
BTW, the reason it's considered a MK-II is that you left the breeder option's initial temperature at 3000 instead of 0.
