A list of good reactor designs (IC² v1.103 and earlier)

Quote from sliderpro

Mark IV,working time 23 sec,cooling -14 sec
http://www.talonfiremage.pwp.b…i=1k101010114010101001019
Low working time and extremely low cooldown,what makes it much easier for redstone timing,used RP and liked it

Simplified Mark IV,greatly lowered output(-200) but working time boosted to 1.10 min
http://www.talonfiremage.pwp.b…i=1k101010114010101001019
Prefer first one,though

Zero-chamber breeder,2 cells charge - seems pretty nice as a beginning reactor and breeder
http://www.talonfiremage.pwp.b…=1p10101001501521s1r11r19
platings allow to run on 9000+ temp w/o risk

Mark IV 4 chambers,140 eu/t,can run 0,85 cycle and has 10 HD
http://www.talonfiremage.pwp.b…=1m10101001501521s1r11r10

Display More

1. im not sure why is that so, but you have set wrong breeder options, without it it looks like this (very bad) http://www.talonfiremage.pwp.b…i=1k101010014010101001010
2. same here http://www.talonfiremage.pwp.b…i=1k101010014010101001010
3. maybe take a look at this one (does the same) http://www.talonfiremage.pwp.b…=1p10101001501521s1r11r16
4. this one is ok

Quote from Zephyr16

I fiddled with the reactor planner for a few hours trying to come up with a good design and I came up with something that is a Mark II and has a 26 minute cooldown rate, at the cost of efficiency, it needs 6 uranium cells and outputs 120eu/t with an effective 104eu/t, I have no idea if this design was already put up by someone, but if it is then someone will catch it. I am not going to go through 6 pages and look at every reactor design so if I used someone else's by mistake I'm sorry, don't cry about it.
Here is the link. http://www.talonfiremage.pwp.b…10101001511f21s1r14lflr10

here, i slightly modified it http://www.talonfiremage.pwp.b…10101001511f21s1r14lflr10

Ah yes I didn't see that, 2 less HD's nice.

Quote from raGan

1. im not sure why is that so, but you have set wrong breeder options, without it it looks like this (very bad) http://www.talonfiremage.pwp.b…i=1k101010014010101001010
2. same here http://www.talonfiremage.pwp.b…i=1k101010014010101001010
3. maybe take a look at this one (does the same) http://www.talonfiremage.pwp.b…=1p10101001501521s1r11r16
4. this one is ok

1) What the hell,I was so damn happy..sure,there was something strange about this working time and cooldown..man,WHAT a dissapointment
2)*crying*
3) impossible to do better x__x huge dissapointment
4)*smile with a crying face*
have...to..IMPROVE...!

Quote from Rick

If someone makes this reactor slightly better i could ad it to the list. Then we have a 1 2-pair uranium reactor a 2 2-pairs uranium reactor and a 3 2-pairs uranium reactor XD. Atm http://www.talonfiremage.pwp.b…=1k10101001501521s1r11r10 has almost the same eu output but better eff.

And now ? http://www.talonfiremage.pwp.b…10101001511f21s1r14lflr10

Edit: YO http://www.talonfiremage.pwp.b…10101001511f21s1r14lflr10 12 HDs ! and you can put 2 uranium cells to free slots (117 eff EU/t)
Edit2: if you put HDs into empty slots, you wil get same cooldown time and longer run time but no more eff. EU/t
Edit3: Also i have beaten actual Eff. 3 MK II in list by amazing 4 sec and 0.02 effective EU/t ! not sure if unnoticed or ignored - http://www.talonfiremage.pwp.b…1k101010037ps011111101110

Well I think my design was rather brilliant for just starting out with reactors:p

Quote from raGan

And now ? http://www.talonfiremage.pwp.b…10101001511f21s1r14lflr10

Edit: YO http://www.talonfiremage.pwp.b…10101001511f21s1r14lflr10 12 HDs ! and you can put 2 uranium cells to free slots (117 eff EU/t)
Edit2: if you put HDs into empty slots, you wil get same cooldown time and longer run time but no more eff. EU/t
Edit3: Also i have beaten actual Eff. 3 MK II in list by amazing 4 sec and 0.02 effective EU/t ! not sure if unnoticed or ignored - http://www.talonfiremage.pwp.b…1k101010037ps011111101110

I believe I may have beaten your reactor by just a tad bit(:
http://www.talonfiremage.pwp.b…10101001511f21s1r14lflr10

It is a little bit more efficient for it uses 5 uranium instead of 6, the cool down rate is 10 seconds slower, and it efficient eu/t is a bit lower, 103 instead of 111, but it is a bit more efficient because of the one less uranium cell.
Edit: By efficiency I beat it a little:p

Quote from Rick

http://www.talonfiremage.pwp.b…10101001511f21s1r14lflr10

I see 3 HD's in a row next to each other i think it can be optimized better.

My try: http://www.talonfiremage.pwp.b…10101001511f21s1r14lflr10

At least add me as one of the designers because he built on my design.

Quote from Zephyr16

At least add me as one of the designers because he built on my design.

Number of uranium cells is the only similarity. It's not that i edited yours, i started from scratch, but you can be added too, idc.

http://www.talonfiremage.pwp.b…1k101010037ps011111101119

breeder,which charges cells quite fast,can be modified to 5 chambers easily,moving cells into 4 chambers now >_> think,it's quite useful

Quote from Rick

I just got a nice idea for a easy breeder. What if you could make a positive breeder that requires no warming up but recharges depleted cells in 1 cylce? I dont suppose you would get max efficiency but it should be very easy to use just drop in the cells and wait.
Edit: seems you can only recharge depleted cells for 73% this way in 1 cycle. If there only was a way to let it heat up quickly and then slow the heating up down. Prolly means you need buckets or ice which are feeded with a pipe after a certain time.

http://www.talonfiremage.pwp.b…101k1010037ps011111101110 I was not able to recharge cell using only 2 uranium cells.
Edit: another one http://www.talonfiremage.pwp.b…101k1010037ps011111101110
Edit2: actually i was able http://www.talonfiremage.pwp.b…101k1010037ps011111101110 and http://www.talonfiremage.pwp.b…101m1010037ps011111101110
http://www.talonfiremage.pwp.b…101m1010037ps011111101110

And because i don't want doublepost, I'll put here cheap upgrade to starting reactor. (+1 chamber)
3.25 cycles, 24min CD, 2.33\2 eff. and 61\70 eff. EU/t
http://www.talonfiremage.pwp.b…=1p10101001501521s1r11r10
http://www.talonfiremage.pwp.b…=1p10101001501521s1r11r10

I kept tinkering with planner and made this: http://www.talonfiremage.pwp.b…=1k10101001501521s1r11r10 (3rd generation)
Mk III, slightly more efficient than one listed

Mk V with shorter cooldown (i don't know if someone is even using those): http://www.talonfiremage.pwp.b…e=1k101010114010101001019

So it looks like I shaved 4 seconds off of Maes' Mark-II-1:

http://www.talonfiremage.pwp.b…=1k10101001501521s1r11r10

I'm not really sure HOW I shaved off 4 seconds; I just studied the reactor setup and figured out the basic idea, then went around playing with placement. *shrug*

You can put another IHD in the empty space if you want, but it doesn't seem to make much difference.

Quote from Rick

I just got a nice idea for a easy breeder. What if you could make a positive breeder that requires no warming up but recharges depleted cells in 1 cylce? I dont suppose you would get max efficiency but it should be very easy to use just drop in the cells and wait.

Edit: seems you can only recharge depleted cells for 73% this way in 1 cycle. If there only was a way to let it heat up quickly and then slow the heating up down. Prolly means you need buckets or ice which are feeded with a pipe after a certain time.

What do you mean 73%?4 UC can't charge 1 IC with 9k hull in 1 cycle? It sure can.Quick way to heat up quickly..gimme a sec
Remade design to work with 4 chambers
http://www.talonfiremage.pwp.b…1m101010037ps011111101119

Edit:I finally got,what you mean
Here is my breeder
It goes 1 cycle and charges 2 cells and heats components to 9k + heat
I have an idea for breeder - component heater reactor idea,working on it

Edit:here goes,almost 1cycle,charges 4 cells,still working on it
http://www.talonfiremage.pwp.b…1k101010037ps011111101110

Edit:finally,1,04 cycle,everything on ~9,5 heat,12HD 34CC,4 IC charged
Frigging happy with myself,working on fewer chamber versions,precisely - to fit your breeder
http://www.talonfiremage.pwp.b…1k101010037ps011111101110
Some people may want to try their own breeders and this design may come in handy

Edit:Rick,made a heating reactor to feed your breeder with heated components +2 cells charged +2 cells on~67% charge,using components only to be used next in your breeder
http://www.talonfiremage.pwp.b…1m101010037ps011111101110
looks like a perfect link want this to be added next to your breeder >_>