A list of good reactor designs (IC² v1.103 and earlier)

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…110010101001010

Mark II-2
1 additional chamber
2.33 eff
Active 70 EU/t
Effective 59,70 EU/t

Quote from Belak

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…110010101001010

Mark II-2
1 additional chamber
2.33 eff
Active 70 EU/t
Effective 59,70 EU/t

Are you serious ?

Quote from Rick

Dont copy other ppl designs pls. This one is already in the list and its exactly the same.

Woops I pasted the wrong link, mine was kinda different as you can see from the stats.
Edit:I found it here it is: http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…110010101001010
I swapped a few components now it is :
Mark II-3
1 additional chamber
2.33 eff
Active 70 EU/t
Effective 61,16 EU/t

Quote from Belak

Woops I pasted the wrong link, mine was kinda different as you can see from the stats.
Edit:I found it here it is: http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…110010101001010
I swapped a few components now it is :
Mark II-3
1 additional chamber
2.33 eff
Active 70 EU/t
Effective 61,16 EU/t

Display More

May i help ? You can remove 1 HD http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…110010101001010

Mark II

140 EU/t running, 97.56 average

2.33 eff

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1f21s1r14lflr10

Well.. Someone didnt believe me so here it is...

Mk1 120 EU/t
-4 heat
1 useless plating =P

NO ICE OR STOPPING TO COOLDOWN

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

I'm man enough to admit when I'm wrong, but 1 efficiency...good if you're swimming in uranium or have a good breeder set up, I guess!

That was my bad, Rick. I thought he meant he had somehow come up with a design for a Mk1 with high efficiency that output 120 EU/t, not an efficiency 1, so I told him to post it in this thread. Had I realized he was talking about an efficiency 1 I wouldn't have suggested it.

Quote

2. http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…7ps011111101110
Through dezuman had the record for best 3 eff reactor for a long time
Maes managed to beat dezuman's cooldown with a whopping 1 sec. 3
efficiency, 84,84 eu/tick average output. It produces 120 eu/tick while
running but needs 70 mins to cooldown after each cycle.

OBJEEECTION!

Isn't that just a bug in the app? Unless it's more complicated than I assume it is, moving 2 HDs shouldn't affect cooldown...

Edit: Doesn't matter, beat that anyway
http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

Quote from dezuman

OBJEEECTION!

Isn't that just a bug in the app? Unless it's more complicated than I assume it is, moving 2 HDs shouldn't affect cooldown...

Edit: Doesn't matter, beat that anyway
http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

It's not a bug.
Anyway, I did this "for you" while ago.
https://forum.industrial-craft.net/index.php?page…34071#post34071

That's just my design mirrored and flipped, no?
STOP THIS MADNESS ALREADY, THOU SHALT NEVER BEAT ME!

Edit: Or well, it's my *original* design at any rate, didn't realize the one in the thread wasn't that ... one ... whatever, mirrorring/flipping the design around to trick the app feels kinda meh anyway.

Edit2: Unless the HDs ingame distributes heat unevenly, it ought to be a bug at any rate.

Quote from dezuman

That's just my design mirrored and flipped, no?
STOP THIS MADNESS ALREADY, THOU SHALT NEVER BEAT ME!

Edit: Or well, it's my *original* design at any rate, didn't realize the one in the thread wasn't that ... one ... whatever, mirrorring/flipping the design around to trick the app feels kinda meh anyway.

Edit2: Unless the HDs ingame distributes heat unevenly, it ought to be a bug at any rate.

Look here: https://forum.industrial-craft.net/index.php?page…d&threadID=3968
Even if it looks just like your design, it is better.

I'm curious though, did you *know* you just flipped and mirrored my design? If so that should be explicitly stated as to not make people believe there was any countless hours of mindless building involved as opposed to quick&easy puny brainwork

Quote from Ultra695

Mark II

140 EU/t running, 97.56 average

2.33 eff

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1f21s1r14lflr10

The Bottom right HD can be removed and replaced with whatever you want for virtually no difference in the reactor.

If you have a very severe need for power it can safely be replaced by a uranium cell for 10 more EU/t and reduced efficiency, and a 20 minute longer cooldown.

Quote from dezuman

I'm curious though, did you *know* you just flipped and mirrored my design? If so that should be explicitly stated as to not make people believe there was any countless hours of mindless building involved as opposed to quick&easy puny brainwork

1. I filled reactor with coolant cells.
2. I flipped/mirrored position of uranium cells from your design (I tried all 4 options)
3. I started to add HDs
4. TADA, your design....
Actually it is very hard to not build your design if Uranium cells are in same pattern and position (1 block from corner). I think position of Uranium is key thing when building reactor.
Also there should be an option to flip design in planner itself;

My first attempt at a design. I don't THINK it has been posted before.

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

Mark III
Effeciency: 2.6
Effective EU/t: 70.12 (Active EU/t: 260)
Max Run Time: 00:49:48 (30% of a cycle)
Cooldown Time: 02:14:52

I'm not sure how good that actually is, it seems pretty good to me. I am planning on setting up 4 with some redstone/redpower to keep continuous generation. Can this design be made more effecient?

- Monk