Hello guys/girls here on the forum.
I have this reactor design that I recently made up, and I was just wondering how well it works and what classification would it fit into.
It's water cooled, and my designs create upwards of 300EU/t. 
I'm kinda new to this mod and the dynamics of the reactor setups, but I hope that one of you more experienced ones out there would shed some light on this layout.
See attachment.
http://www.talonfiremage.pwp.b…c0=1p10101001501521s1r11r
Use the reactor planner. It has all the info and classifications you need for that layout.
Basically its a mark V, wont last long at all before it explodes, Its EU/t is 240, but because its a mark 5 and can only run a tenth of a cycle, the effective eu over longterm is about 20.
You also have a few platings and coolants that are not being used at all.
Display MoreThanks.
Okay, I got a new reactor layout, messed around with the positioning and I got it down to a Mark II-E EE
http://www.talonfiremage.pwp.b…=1k10101001501521s1r11r10
Full Name of this reactor design: WinTec Engineering Corporation - Electric Division "Voltronn" Mark II - E EE Nuclear Fission Reactor, Type 2
Now the junk out of the way, I got to go to my main world and fix this design o.o
still a pretty bad design. just by taking yours and trimming the hell out of it real fast I got this
also a pretty bad efficiency at 1.0
edit: link fail
What would be classified as a "good" efficency? 2.00?
Here's the design i'm currently using right now in my reactor.
Trimmed the hell out of it, and this is what I got.
http://www.talonfiremage.pwp.b…=1n10101001501521s1r11r10
Mark I-O EC Classification 
Cheaper and does same thing by Rick: http://www.talonfiremage.pwp.b…=1n10101001501521s1r11r10
