I've searched 3 pages, but I don't see anything related to this. I hope I don't miss an idea and end up with an idea that has been suggested before.
Have you ever felt that that Insulation Cutter was not HAYO enough?
Have you ever needed to produce some copper cable out in the field, but you don't have a crafting table on hand?
Want to revolutionize your cabling?
No worries, for Industrial Corp. presents - the Cable Interactor (TM)!
The Cable Interactor is manufactured from the highest quality ingredients!
PS Pay a fairly small amount to gain access to our manufacturing blueprints!
It is a Tier-2 Item, so you will also need the Multi-Functional Electricity Transmitter(TM) or a Lapis-Lazuli-Based-Portable-Energy-Storage-Unit(TM) (commonly known as the Lappack) to charge it. Because of the included Energy Crystal, it has a hundered thousand EU storage, so you can spend much more time before heading back to your base to recharge!
The Cable Interactor has three modes, change by Mode-Rightclick! The first mode is the Cable-Insulator Mode. Left-clicking an already-placed cable removes one layer of insulation from similar cables up to 4 blocks next to it and places 1 rubber into your inventory per layer of insulation cut, at the mere cost of 40 EU per layer of insulation removed. Shift-left-clicking suspends the multi-uninsulate behavior. Right-clicking an already-placed cable does the opposite effect.
The second mode is the Cable-Presence Mode. Left-clicking on a cable breaks it almost immediately, for 60 EU! Additionally, you can right-click on a placed cable, and then target another cable, and the position of the cables will be swapped, for 100 EU only!
The last mode is the Cable-Fabrication Mode. Right-clicking will open up a GUI, and you can select a cable type in the GUI. After that, you select the number of cables to fabricate. Finally, you click the "Fabricate" button, and it will use items from your inventory to fabricate the items! (Note that we have installed a HAYO-2000 that recognizes when your inventory is full, or if you have insufficient items, and will not conduct this process, telling you the reason.)
Additionally, another product we have released, for the slightly more affluent, the Upgraded Cable Interactor(TM)!
PS Purchase this and you will get the Blueprints 15% off!
The Upgraded Cable Interactor has an increased 100 000 EU storage! With some new technology, we are also able to obtain savings of 10% on electrical stuff! Additionally, it comes with 4 new modes:
EU-Reading Mode. Right-click on the cable to start the reading, then right-click again, to receive the following information, for a small cost of 25 EU:
- Average EU/t.
- Largest packet seen.
- Loss of this cable.
- Loss of this entire piece of cable.
Painting Mode. Right-click to open the GUI. You can assign up to 4 colors, and 4 corresponding keybinds in the interface. After that, press one of the keybinds to start painting for that color, using the dye in the interface. Adding water will clear the slot of dyes. Each painting costs 35 EU!
Next, we have the Telekinetic Cabling Mode. Shift-right-click a placed cable to target a cable of that type. Then, right-click an already-placed cable to initialize a link. After that, left-click another placed cable to finished the link. If you right-click on a non-E-net related object, it will automatically place cables in the shortest route from both ends of the link. Additionally, it will tell you how much cables left of that type you are missing, HAYOishly!
Finally, the Wrench mode. No surprises here, it functions like a wrench for Electrical Storage Units and Transformers.
WHAT ARE YOU WAITING FOR? BUY THE CABLE INTERACTOR NOW!