HowTo Use a Canning Machine in enrich mode

  • HowTo Use a Canning Machine in enrich mode:


    way of example with Coolent (1000mB Water + 8 Lapidust)


    Tank to Tank variant
    pump 1000mB Water into Input Tank and place 8 Lapidust in center Slot. After Processing you have 1000mB Coolant in Output Tank.. use Pump or Fluid Ejector Upgrade to remove it


    Tank to Cell variant
    pump 1000mB Water into Input Tank and place 8 Lapidust in center Slot AND place a "Empty Cell" into Slot above Input Tank. After Processing you have a Coolant Cell in Slot above Output Tank

  • Why there is no way to refill input tank via cells?


    Thunderdark: Uni.FluidCell (fill with Fluid) right Click Machine... and never ask Why in a howto Post. ;)

    The post was edited 1 time, last by Thunderdark ().

  • i tried this but it made a universal fluid cell containing ic2coolant, which isn't a coolant cell

    Maybe input a normal empty cell and not a universal fluid cell??? :D

  • i tried this but it made a universal fluid cell containing ic2coolant, which isn't a coolant cell

    I have the same problem.. The universal fuild cell whit IC"coolant, dont work to craft the upgrade :/ What can i do ?