Help: Power operation

Quote from esteiner

- There are machines that can accept a voltage of 128EU / t but I'm

giving them 32EU / t, does that affect the performance or consumption of
the machine?

No, only putting them on a 32EU/t line does not affect their performance. The EU/t it shows in the tooltip is only the maximum EU a machine can accept in a single energy packet. If you give it more, it will explode. The energy usage of the machine is not affected by how much energy you supply to the machine.

Quote from esteiner

- In the wiki I read that the induction furnace consumes 16EU / t to

maintain the heat but I produce 12EU / t and I gain energy even with the
thermal centrifuge and the blast furnace also with redstone levers,
what is happening?

The Induction furnace hasx 2 energy usages. The first one is to heat up and sustain the heat level. Heating up/sustaining the heat level requires 1 EU/t. The second one is the actual smelting operation. That one requires another 15EU/t. This means, the Induction Furnace uses less power, if it does not smelt anything (but keeps up the heat level)(1EU) than if it is smelting something (1EU + 15EU).

Quote from esteiner

- When my chain of solar panels had 10 panels and added two

more, these last two did not send energy to the cable to which they were
connected and I had to place them on the cable that connected the
previous ones, Why this happens?

B=Battery (CESU)

C=Cable (Tin cable)

P=Solar panel

*The red solar panels did not send energy to the red wire, I saw it with the eu-reader. I
had to modify the configuration to the next one that does transmit all
the energy that it should, I think, that I will ask later;).

Code

    PPPPPP                         PPPPP
BCCCCCCCCC          --->       BCCCPPCCC
    PPPPPP                         PPPPP

Salu2

Display More

This is most likely caused by the solar panels only producing 1EU/t, while the energy loss through the cables from the solar panel to the CESU is more than 1EU. If you send less power than the energy loss alone, it won't even try to send the energy.

No power is lost. The transformer buffers the energy it receives, but does not send. (If you attach a batbox to the LV transformer you'll see, that the batbox charges 32 EU every tick, but the MFE is emitting 512 EU every 16 ticks.