Hi I need criticism on my reactor

I like the design, but if you're going for max eu/t it would be easier to take those 6 chambers you were going to add on and just make 3 more reactor cores. You can make 4 35 eu/t (140eu/t total) MK II core only reactor with less cooldown time than the thing you have going

Here is the design I came up with. 2.33 eff with 35eu/t and a 64min cooldown with just the core of the reactor. (Tested, will not explode, although it will get hot enough to evaporate water, so you will need the water flowing from above)
http://www.talonfiremage.pwp.b…10101001511f21s1r14lflr10

My paltry contribution: http://www.talonfiremage.pwp.b…10101001511f21s1r14lflr10
the same stats as your own, diffrent pattern
Dezuman has made a design with more cooling and 80EU/t but I am unable to find it
you are best off making two 2 chamber reactors and having them both run at the same time (you can make a 3 row (35 eu/t) two chamber as Mark I twice for a total of 70 EU/t average output, the best Mark III two chamber that I have come across has an average output of 51 EU/t)

http://www.talonfiremage.pwp.b…c0=1p10101001501521s1r11r

Making 3 of these is cheaper, got higher eff and will output more. Dont need to cooldown either.