it is an good design,
however. do you have the tools to make the ice stacks? that wil reduce your effective eu/t etc etc etc... yata yata yata....
just an good design lad, congrats
I use EE and RP2
I'll just use a block breaker to get snow from snow golems
Than just up the Snow to ice 
To make it go better I'll setup a line of snow golems to get alot of snow fast to get a surplus amount of snow.
I need to figure out breeders next to get a good setup
Any tutorials on breeders?
I use EE and RP2
I'll just use a block breaker to get snow from snow golems
Than just up the Snow to ice
To make it go better I'll setup a line of snow golems to get alot of snow fast to get a surplus amount of snow.
I need to figure out breeders next to get a good setup
Any tutorials on breeders?
you wil need to ask rick about breeders, i dont know much about them. also you can look at the sticky topic (list of good reactor designs) that should get you going 
Nice. Do you prefer high output or rather effectivity ?
If you want to keep your first "child", I made slightly cheaper version for you here. If you compare it with your design, you will notice some changes to generally improve cooling and reduce cost.
If cells are not problem for you, i suggest looking for most effective EU/t reactor somwhere around (not that old thread). This is one of reactors there.
If you want to get most EU from your cells, this one has very good effectivity.
I did not make the last design myself.
í suggest you download the thermomiter mod to for the breeders, lets you ceep an eye at your temperature if you use breeders.
í suggest you download the thermomiter mod to for the breeders, lets you ceep an eye at your temperature if you use breeders.
If you want to use breeders, I think thermometer is absolutely necessary.
Nice. Do you prefer high output or rather effectivity ?
If you want to keep your first "child", I made slightly cheaper version for you here. If you compare it with your design, you will notice some changes to generally improve cooling and reduce cost.
If cells are not problem for you, i suggest looking for most effective EU/t reactor somwhere around (not that old thread). This is one of reactors there.
If you want to get most EU from your cells, this one has very good effectivity.
I did not make the last design myself.
Looking to use it on a mass fab, so I want the total energy to be high. On the list of reactors that is Mark-II mine has the highest output so far. (And still looking to tweak it more :P)
More cycles I can have it do the better,
How long is 1 cycle anyways?
So 100,000 ticks per cycle, that is 20 ticks per second
so 5,000 seconds/60 (mintue) = around 84 minutes so about a hour and a half of power.
So about 4.5 Minecraft days
That is awesome
Ice Eater (Reactor)
Keeping it going requires a factory to create ice, eff of 3.33, output of 200EU/t, total output 40 million Mark-II
On the list of reactors that is Mark-II mine has the highest output so far. (And still looking to tweak it more :P)
Actually, my slight edit of your design performs much better (try to remove that ice cube from your design).
Your design has that high output only if you constantly provide it with ice cubes. If you can do that, you should go straight for some CASUC (1000+EU/t).
Actually, my slight edit of your design performs much better (try to remove that ice cube from your design).
I use EE and redpower 2 so creating a mass amount of ice is nothing, anyways the ice is to allow me to cool my reactor faster.
Though I may look into making a cross breed of the slight tweak of yours that you made on mine and the orginal to reduce the costs and may produce a higher output 
I use EE and redpower 2 so creating a mass amount of ice is nothing, anyways the ice is to allow me to cool my reactor faster.
Though I may look into making a cross breed of the slight tweak of yours that you made on mine and the orginal to reduce the costs and may produce a higher output
soooo... Ice is no problem ? Well then http://www.talonfiremage.pwp.b…=1l10101001511621s1r11r10.
Edit: fixed link
soooo... Ice is no problem ? Well then http://www.talonfiremage.pwp.b…=1l10101001511621s1r11r10.
Edit: fixed link
........ 400 Ice to keep that going
But pumps out damn near 400 Million EU
The question is WHERE WOULD I PUT ALL OF THAT!
Not to mention the output on that is higher than 512 so no cable can handle it.
Anyways was told UU-Matter can be turn into Uranium (wasnt told the recipe though so I have to try and find it)
So once I figure out the required EU to create enough UU to keep Uranium cells in my reactors I'm all good
........ 400 Ice to keep that going
But pumps out damn near 400 Million EU
The question is WHERE WOULD I PUT ALL OF THAT!
Not to mention the output on that is higher than 512 so no cable can handle it.
- You would put all of that into your 40 MFSUs.
- You probably forgot about HV cable, which can handle up to EV (2048EU/t). That should be enough.
SO ? Are you goin to try it ?
- You would put all of that into your 40 MFSUs.
- You probably forgot about HV cable, which can handle up to EV (2048EU/t). That should be enough.
SO ? Are you goin to try it ?
Is that 400 Ice per Cycle?
Got less than 1/4 of the uranium in the reactor for that MASSIVE setup and the cable burned up.
Is that 400 Ice per Cycle?
Got less than 1/4 of the uranium in the reactor for that MASSIVE setup and the cable burned up.
3x Insulated HV cable(made of refined iron) won't burn if there is no more than 2048EU/p. Did you place HV transformer correctly ?(you need HV transformer)
3x Insulated HV cable(made of refined iron) won't burn if there is no more than 2048EU/p. Did you place HV transformer correctly ?(you need HV transformer)
I forgot the transformer all together XD
gonna try a smaller version of it with my ice machine than slowly up, I have to build onto it
Can I get help setting up a off switch with RP2?
Can't figure out the gates and that, trying to get my nuclear reactor to run for 20 seconds every 5 minutes (To resupply with ice)
here is my design http://www.talonfiremage.pwp.b…=1k10101001501521s1r11r10
