Posts by bear989

http://imgur.com/a/lMYl2

it works with the current GT6 and gregs rocks made it to the moon!!

ok so you have to use the other set of dies, well the way NEI works with your wires is very deceiving. thanks for the help.

it only happened with the energy kit, I set up about 4 liquid sensors in the same stream with no issues. I have live stream footage of it happening if it would help.

I attempted to use a energy sensor kit on a GT6 battery box today and it crashed the server http://pastebin.com/ieSFJahM

http://imgur.com/a/Q22Wf this is what i see in NEI. I have made 1m of the .072 restrictive wire and it didnt work.

making dice i noticed that if you throw to many in the bronze tub the output will be voided after 2 rather than the processing just stopping. also I think the wire needed for the DC motor recipe is the wrong one. you need a lathe to make a wire mill and a wire mill to make the 1.166 wire needed for the DC motor.

ok I will check out the new ore gen asap, thanks for the all the hard work! I really enjoy learning your mod.

i was looking at the springs for tin snips and sulfuric acid production tonight in my last video till the ore issue is fixed. I found a few bugs with NEI for wires, not sure you can fix it, but it shows all the wires rather than just the one needed when looking at recipes. also saltpeter for sulfuric acid? shouldnt it be sulfur? saltpeter is KNO3.

ok will do, thanks for checking it out.

I like the way they look, I just wish I could find them. when I go mining I tunnel around 11 since IC2 spawns all ores at that level and you can also find diamonds, lapis, and redstone there. but I always search tunnels I find as well. maybe I need to setup a miner/quarry to find them better. I have found atleast 15 diffrent lava rivers/lakes below 16 and still havent seen any oil.

suggestion, a way to upgrade the evaporator to the electric version.

edit:is there a level or biome requirement for your ores? I have never played without GT before so I didnt need them till now, I have done a lot of mining and only found limstone once, no oil or other ores.

there is still 4 recipes in the iron workbench for the detonation sprayer even though the axes have been removed.

edit: did you remove the guide book?

edit2: diamond drill in D. sprayer doesnt activate the achievment

ok I used the detonation sprayer tonight for needle files and and it did all 64 for one diamond dust, witch I dont see an issue with, but it didnt use up the gunpowder.also is there a way to use ore dic axes so thermal foundation bronze axes will work, if installed they take over the IC2 bronze axe.
also the axes have the same damage issue as with the foge hammer in the last post, it only works with fresh axes but only does 1 damage to it.

sounds good, would you like me to just PM you what I find?

thanks man, I am doing a video series looking at IHL so expect a lot of these questions.

P.S.
speaking of the iron worbench recipe requires a forge hammer with 80 uses left.

hey is it intended that sticky resin dosent stack in the evaporator?

graphite was the only issue I have seen so far, I will keep looking and let ya know. hopefully that list i made earlier made sense, I wrote it while streaming so I was rushing a bit.

porcelain bath, chiney, ring, lamp holder, and insulator, and Gaedes pump barrel & chemical rest. oven gives cell back, presipatator/condensor gives cell back rather than the proper container

rectifier/transformer unit only gives 1 cell back with 2 in
vacuum induction melting furnace 144 cells in 0 out

ya good luck with that! where are you getting all your elements from if there is less ores in the world? Gregtech veins are really nice, once you fine one you are set for a long time! Gregtech has almost always messed with vanilla and other mods stuff, since like GT3, so they would balance more with Gregtech. Honestly you sound like I did when I first started Gregtech 4 a few years ago, and now I wont play much minecraft without GT and try to talk greg into making things harder for a realistic felling.

the the sap bucket still gets taken when used on a coagulator, also the timing set really fast and you greg had nerf'd sticky resin to 1 rubber bar per sticky resin so 5 bars from one sap bucket seems a bit much, hope this helps the compat between the two mods.