Posts by dohvakin96

Quote from Blood Asp

Not a bug. Update Forestry. They changed their recipe system and i adapted to it.

Update to Version 5.08.21:

update forge 1481 (Tried to fix the SMP connection bug, but no success so far, still works with all old 1.7.10 forge versions)
update ic2 736 (also no forced changes here)
graphitecutting recipe
certus quartz unification
fixed solar boiler running at night
tried to fix worldgen loop issues by copying fixes from GT6. No idea if that worked.
fix crowbar crash
fix turbine not breaking
large gas turbine now needs muffler
fix rounding bug with large plasma gen resulting it in running for free
fluid detector fix
naquadah reactor tooltip changes
fixing pump pumping oil or other non vanilla fluids
fix recipe.cfg generating new entrys every start

Display More

What do you mean with "graphitecutting recipe"?

Quote from Mitisko

Hi, I need see chargelog v. gregtech_1.7.10-5.08.20 where are his ?

See Post 814 in this thread.

Quote from Drawfox

Oh, no, I just want the new crops, didn't knew if the fertilizer would be needed to this (also, I assume that the Swamp biome and the +240 elevation isn't required to that end too, am I right?)

Thank you very much!

Edit: While here, does anyone knows a way to automate the harvest using IC2 crop sticks, besides using IC2 machines?
I have Thaumcraft 4.2, but I doubt that the golems will interact with crop sticks (maybe the "use" golem can right click the crop, don't know if it will recognize a fully grown crop though)...
Maybe I will have to enable the IC2 machines after all...

You could try TEs Autonomous Activator, I don´t use it for crops, but maybe it works.

There was the idea of using molten salt in a thermal boiler in Gregtech 4, I think. However, it was sadly never implemented. Molten salt would be generated by a molten salt reactor(MSR). A MSR would use FLiBe salt as a more expensive coolant. You start it with some uranium 235 or plutonium. After starting the MSR you could entirely power it with thorium 232 (natural thorium) by breeding it to uranium 233. The whole point of molten salt reactor is, that it is a normal reactor (like the IC2 ones) and a breeder. It is almost 25-times more fuel-efficient than a normal reactor IRL. It uses graphite as a neutron moderator, so we would finally have a real use for that.
To make it not to OP it would use a lot of ressources to build, making it something between the fluid reactor (450 Eu/t) and the Mark I fusion reactor (almost 17000 Eu/t with the large plasma generator). I think that step is to big. I would like to see it in GT5.

Could you tell me the conversion rate of hot coolant/ steam in a large heat exchanger and how much coolant per tick it uses

Quote from Blood Asp

Seems i forgot about the Electrolyzers. Hmm, maybe i should also move one recipe for hydrogen to MV for less machines. And finish the processing array.

Also finish the large turbine so plasma can be used there more efficient. Still so much to do...

How will you use the plasma? Adding a multiblock plasma heat exchanger emitting 64000L of Steam per tick? Then we would need better pipes. using plasma directly in a turbine wouldn´t be very realistic.

Quote from Blood Asp

Is it hollow? 2 Air blocks inside? And i can't really see the gras in front. The blocks in front of the turbine must be air. The back is really a dynamo, not a energy hatch?

All ideas i currently have.

Quote from Blood Asp

Is it hollow? 2 Air blocks inside? And i can't really see the gras in front. The blocks in front of the turbine must be air. The back is really a dynamo, not a energy hatch?

All ideas i currently have.

It is hollow, 2 Air blocks inside. all blocks in front are air. The back is a dynamo hatch. All casings are turbine casings.

The turbine controller says incomplete structure. Is something wrong with my turbine or do I need hatches with a specific voltage?

NEI doesn´t show me the recipe for the large turbine controller block. Is it still missing? I`m using version 5.08.16.

Quote from Muramasa

Molten Naquadah from a Fluid Extractor put into the Fluid Reactor?

Maybe you need to elaborate?

I tried that before.

I found the recipe, it doesn´t use molten Naquadah, it uses enriched Naquadah cell, made from enriched naquadah dust.

Quote from sprAngles

I've never played GT before GT5 and now I'm currently lost trying to build a fusion reactor haha. Can someone explain what exactly are the blocks referred to in the tooltip?

Place your fusioncoils (or superconducting coils with mark I) like it is shown in the tooltip. "This" is the fusion reactor block itself. Hull are the fusion casings mentioned in the tooltip of the fusionreactorblock. Plasma extractor are Output Hatches. Injectors are Input hatches. Energy injectors are energy hatches. You need to have the right tier of hatches.

Quote from MauveCloud

That would only produce microscopic amounts of the heavier atoms, though, right? iirc, naturally-occuring elements heavier than iron are considered to have come from supernova explosions.

Bigger is better. I think it would be less than one gramm.

Quote from GregoriusT

Basics of Fusion: Anything beyond Iron costs way too much Energy to be created. And Iron itself doesn't generate Energy, only the Atoms below Iron do. I don't know if your Recipes follow that Rule, but they should if you didn't do that.

You could create heavier atoms by a so called r-process, a thermonuclear explosion would be enough to created very heavy elements like einsteinium and fermium. You don´t need much stuff to create a thermonuclear bomb, but controlling the explosion could be a bit... difficult.

Quote from Blood Asp

And should there be some recipes missing that logically should be in the distillation tower then just tell me and i may add it.
Also the fusion reactor needs a few more recipes. I want at last 6 Plasma recipes. Each tier one low efficiency with cheap materials and one high efficiency with expensive materials. The current ones are Tier 1+2 and cheap.(Water and enderpeals are endless). Also some ideas for metal fusion besides these allready there would be good.
Also no one said anything about the balance of the stuff i added. Are the recipes fitting or too expensive/cheap?

Mark 3 expensive: Silicon28 + Silicon28 = Nickel56 (PLasma)
Mark 3 cheap: Oxygen16 + Oxygen16 = Sulfur32 (Plasma)
Mark 2 expensive: Neon20 + Helium4= Mg24 (Plasma)
Mark 1 expensive: Carbon12 + Helium4 = Oxygen16 (Plasma)
That are just a few fusion processes, they all produce energy inside suns. The big suns are able to produce everything with mass numbers lower than iron60. So metal fusions for metals with higher mass number (gold, tungsten) would need huge amounts of energy.

I can´t craft the Nether Star Plate which I need for the fusion controll computer. Did you removed its recipe again???

Quote from Blood Asp

I did some number crunching.
The Fusion MKI + PlasmaGen MKI produce ~16kEU/t and need ~10kEU/t + lots of water to run.
Fusion MKIII + PlasmaGen MKIII produce ~224kEU/t and need 40kEU/ + lots of water + ~1 Enderpearl/sec to run.

For what do I need the enderpearl? And I still don´t know what to do with the processing array?

Quote from Blood Asp

What problems exactly?

Also found the reason why the oreprocessing is broken and why ore textures are wrong.

But at last i now get bugreports. That no one noticed this until now...

The hopper inputs in ALL slots of the machine, not just into the input slot. And it outputs items from the input slot, not just from the output slot. That means it takes out the ores from the macerator instead of the crushed ores, making automation almost impossible.

Quote from Blood Asp

It comes from depleted thorium fuel rods.

There seems to be a quite big problem with the ore processing loader. In the end likely only a wrong char somewhere, but who knows how difficult it is to find it.

There are also problems with hoppers and the bronze machines and it looks like the 5.08 reenabled the IC2 recipes of electronic circuits and advanced circuits.