Two Reactor Liquid Coolant Setup

Has anyone thought of using two reactors, one with 60k coolant cells to cool it in cycles and then a second one with the reactor pressure vessel to convert the stored heat to energy through liquid coolant.

I have not tried this yet due to the amount of time it takes for cycles to happen.

The idea is to use a hopper clock to make a reactor run for 80 minutes or so generating eu and storing heat in a bunch of 60k coolant cells. After the cycle you move the coolant cells to a reactor surrounded in a pressure vessel. THe reactor just contains a bunch of heat vents to vent the heat into the liquid coolant.

I think this would give much more eu for your uranium.

Quote from Tomcat

you CANNOT heat cells in a normal EU reactor then cool them in a coolant reactor to double dip on EU, if you heat a cell (or any componant for that matter) in a EU reactor it wont let you put it into a coolant reactor until it has lost all damage (heat) that was gained in the eu reactor. it even has a tooltip that says so, devs are way ahead of you there

Just tested and found this result. Came back on to delete my post but you beat me to it.

ya, might as well