I've easily encountered enough uranium near the surface for a good sized reactor, sometimes right beneath it. There really is no sweet-spot for it; just drill baby drill.
Mark IV EB -- 120EU/t :: Continuous 4 Reactors Swap
-
-
Seriously. My friend and I usually set up BuildCraft stripminers on 30x30 footprints, and the last time we had a base up and running (we recently restarted our server to add more stuff) I think we had 2 *stacks* of Uranium Ore.
-
Using a 9000 heat breeder will raise the eff by alot. You only need a few uranium ore then to keep it running. Eff will be like 25 or so XD
-
Just for the heck of it, I improved the original design
http://www.talonfiremage.pwp.b…=101k101001501521s1r11r10
Although, if you are gonna run several reactors it's more efficient to use many smaller ones (Assumed clocking and such)
-
Using a 9000 heat breeder will raise the eff by alot. You only need a few uranium ore then to keep it running. Eff will be like 25 or so XD
Once again, if you're getting an equivalent efficiency of 25 out of a 9000 heat breeder, there's something seriously wrong with your setup. You *should* be exceeding 30.4 with a properly designed breeder. -
Once again, if you're getting an equivalent efficiency of 25 out of a 9000 heat breeder, there's something seriously wrong with your setup. You *should* be exceeding 30.4 with a properly designed breeder.I didnt do any maths i just made a rough approximation
-
LOL I find so much uranium all the time. I dont even bother with breeding.
Just for the heck of it, I improved the original design
http://www.talonfiremage.pwp.b…=101k101001501521s1r11r10
Although, if you are gonna run several reactors it's more efficient to use many smaller ones (Assumed clocking and such)
Kool, thanks for the suggestion.
It looks like I only need 3 reactors for that [with a slight pause in between] This is way better than what I have.
I could run 2 sets of those.I'll try it out once IC2 updates.
