A list of good reactor designs (IC² v1.103 and earlier)

Quote from PhoenixUltima

So it looks like I shaved 4 seconds off of Maes' Mark-II-1:

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

I'm not really sure HOW I shaved off 4 seconds; I just studied the reactor setup and figured out the basic idea, then went around playing with placement. *shrug*

You can put another IHD in the empty space if you want, but it doesn't seem to make much difference.

Quote from raGan

my last work - http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…7ps011111101110.
Edited dezuman.

Hey,raGan,about your MK5 reactor - hull temp settings are turned to 9k hull.working time is..unbelivable O_o"

Quote from sliderpro

Hey,raGan,about your MK5 reactor - hull temp settings are turned to 9k hull.working time is..unbelivable O_o"

I was wondering why it can run only 35 sec. But this setting does not have big effect on EU/t anyway, just different running and cooldown times.

Quote from raGan

Heh, whoops. In my defense, there are a lot of links in the thread and each one takes a couple seconds to load.

Are we adding any casuc designs to this post?

Quote from PhoenixUltima

Heh, whoops. In my defense, there are a lot of links in the thread and each one takes a couple seconds to load.

Post is on 6th page, yours is on 7th. Maybe going through 1-2 pages before is not bad idea.

My "W" Mk II - http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

Alright, I went through most of the thread and didn't see this setup, so please don't yell at me if it's a duplicate. I took Rick's air-cooled perfect breeder and replicated it with 1 less IHD:

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…114010101001019

As well, this one's easier to heat up - replace 2 of the depleted cells with uranium cells so they form a line and run it a couple of cycles. Then put your depleted cells back in and it's party time. Alternately, if you don't mind using Buildcraft you can just pump a lava lake into 11 tanks and get to bucketing.

At least, that's what it looks like in the planner - I admit I haven't actually tested it out in-game, but I see no reason it shouldn't work. But maybe run it far from your base just in case.

Active Eu/t = 80
Maximum Consecutive Cycles = infinite
http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

i'm interested in such breeder can some one make it better?

5.0 eff

80eu/t

1,14cycle

So here's my contribution:

Basic setup without chambers

• Mark I-O ED
• 40EU/t | Effective: 40EU/t | EU/t per Uranium Cell: 20
• Cooldown: Not requiered
• http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

Basic setup without chambers (little upgrade)

• Mark I-O ED
• 50EU/t | Effective: 50EU/t | EU/t per Uranium Cell: 16.67
• Cooldown: Not requiered
• http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

Upgraded setup with 3 chambers

• Mark II-E ED
• 90EU/t | Effective: 88.05EU/t | EU/t per Uranium Cell: 17.61
• Cooldown: 3min 42sec
• http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

NOTE: If you put another chamber the reactor becomes a Mark I-O ED (Effective: 90EU/t | EU/t per Uranium Cell: 18 )

Full upgrade setup 6 chambers

• Mark II-9 EC
• 120EU/t | Effective: 111.41EU/t | EU/t per Uranium Cell: 18.57
• Cooldown: 12min 51sec
• http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

Temptative upgrade setup 6 chambers

• Mark II-4 ED
• 130EU/t | Effective: 113.74EU/t | EU/t per Uranium Cell: 16.25
• Cooldown: 28min 50sec
• http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

Quote from Maes

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

i'm interested in such breeder can some one make it better?

5.0 eff

80eu/t

1,14cycle

I can't make it better (1.17 cycles) -> http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10
You could try to re-charge 4 cells instead of 6. This breeder doesn't charge all of them with one cycle, you need 2 cycles to charge the 6 cells.

Quote from Maes

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

i'm interested in such breeder can some one make it better?

5.0 eff

80eu/t

1,14cycle

I made this http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10.
It's not much, but it's still improvement.

Quote from nakaran

So here's my contribution:
... bunch of reactor designs...

1. much better design in the first post already
2. http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10
3. http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10
4. http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1f21s1r14lflr10
5. http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1f21s1r14lflr10

I made those 4, one of them them i made before (4). 4 and 5 are same, i just added one more cell.

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1501521s1r11r10

full round
100eu/t
verry low cooling down

( sorry for my bad english )

Don't know that this one's been posted before...

mark-I, low efficiency, but you get 110e/t without any cooldown. Yes, it takes 9 cells, but I haven't seen anybody put up a high-power low-risk reactor yet.

http://www.talonfiremage.pwp.blueyonder.co.uk/reactorplanner…1f21s1r14lflr10