You're welcome.
http://www.talonfiremage.pwp.b…k101010037ps01121s1111110
I didn't spend much time on it so it may not be the best one.
Edit: generation 2 - http://www.talonfiremage.pwp.b…k101010037ps01121s1111110
Edit2: generation 0 - http://www.talonfiremage.pwp.b…k101010037ps01121s1111110
Using original Uranium shape. 14 HDs.
Not /entirely/ sure whats going on here I while I was messing around with Mark II 2.5 eff designs. it has excess heat of 4, but for some reason the maker is telling me it has no cooldown and infinate cycles, classing it as a Mark II - 154
http://www.talonfiremage.pwp.b…ryhx8fpw214ziboe1o9mmgbb4
Whats going on here?
See that smudge over there?.. that's the remains of a bug that dared to hide in the planner 
Small peek: The next IC2 version will allow pipes and tubes to go into reactor chambers. Get that extra chamber to dive into CASUCs which produce 2070 EU/t 
Ive been sitting playing with the planner at work finding new and interesting designs. Stumbled across this and wondered if i'd broken the planner or if the stats actually tie up?
http://www.talonfiremage.pwp.b…hy7ie6lhynne84szpa50pn4lc
Type: MKV
Active Time: 3 mins 27
Cooldown Time: 21 secs
Eu/t: 230
Average Eu/t: 208.8
Efficiency: 3.29
Display MoreIve been sitting playing with the planner at work finding new and interesting designs. Stumbled across this and wondered if i'd broken the planner or if the stats actually tie up?
http://www.talonfiremage.pwp.b…hy7ie6lhynne84szpa50pn4lc
Type: MKV
Active Time: 3 mins 27
Cooldown Time: 21 secs
Eu/t: 230
Average Eu/t: 208.8
Efficiency: 3.29
Cooldown stays at 21 sec even when you drop active time to 1 second. Hmmm.
My nuclear reactors:
http://www.talonfiremage.pwp.blueyonder.…1501521s1r11r10 Your starting reactor(Now even cheaper!!!)
Hey, I've noticed that the when the planning tool changed (about 2 days ago), this reactor went from being a 'Mark I-O' to being a 'Mark II-8'. Was the tool incorrect before?
Now that it is a II-8, I've found a way to bring it back to a I-O for just a small cost:
http://www.talonfiremage.pwp.b…lb70qbthjhcw5rkh3pqma4001
I'm just wondering why the formula used by the planning tool changed. Who maintains the tool?
This way it's cheaper - http://www.talonfiremage.pwp.b…yuzgcna78nmv1makwlozc4r9d
Edit: Now I see only 24 water blocks there. *facepalm*
Tomorow iam free from school so i can hopefully finally finish the new layout. Its taking too long already
Small peek: The next IC2 version will allow pipes and tubes to go into reactor chambers. Get that extra chamber to dive into CASUCs which produce 2070 EU/t
WOOOOOT! i wil LOOOOOOOVE this 
While adding to the resources needed display I realised the planner was counting advanced alloys twice, I fixed it. Sorry for the inconvienience.
I've re-ran the calculations a few times and hopfully they're right this time.
While adding to the resources needed display I realised the planner was counting advanced alloys twice, I fixed it. Sorry for the inconvienience.
I've re-ran the calculations a few times and hopfully they're right this time.
huh wth? That means we where using the wrong cost for a really long time.......How could we not have realised that after building so many reactors XD.
While adding to the resources needed display I realised the planner was counting advanced alloys twice, I fixed it. Sorry for the inconvienience.
I've re-ran the calculations a few times and hopfully they're right this time.
never realy got my atention, i just made the reactor and 20 components each. thanx for the bug "squish"
Hello, folks. 
I'm not very good engineer (and my english is devilish bad), but...
My first reactor (not perfect, but i like this design):
http://www.talonfiremage.pwp.b…aj1slh65zmjn4n0ew50o8sq4g
My first breeder. Positive, dangerous, effective:
Display MoreHello, folks.
I'm not very good engineer (and my english is devilish bad), but...
My first reactor (not perfect, but i like this design):
http://www.talonfiremage.pwp.b…aj1slh65zmjn4n0ew50o8sq4g
My first breeder. Positive, dangerous, effective:
Even if you are no good at making reactors pls read the first post and all the designs in it. There already is a better reactor than yours.
I check the breeder later.
Hey, I've noticed that the when the planning tool changed (about 2 days ago), this reactor went from being a 'Mark I-O' to being a 'Mark II-8'. Was the tool incorrect before?
Now that it is a II-8, I've found a way to bring it back to a I-O for just a small cost:
http://www.talonfiremage.pwp.b…lb70qbthjhcw5rkh3pqma4001
I'm just wondering why the formula used by the planning tool changed. Who maintains the tool?
There have been a few bugfixes over the last week or so. I know I managed to create a reactor with 4 excess heat which was coming out as infinate. There was a *squish* post stright after. Just check the last few pages for examples.
edit: wrong link
http://www.talonfiremage.pwp.b…y8y5mjd2pyajqhdh4ur2b9af4
Just playing with the planner i think i found another bug xD
If its not a bug, 140.6 EU/t average has to be good right?
