oh and how i get uranium fuel ingot ?
when i put uranium in the reactor it don´t work 
Several Interaction Questions.
-
-
oh and how i get uranium fuel ingot ?
when i put uranium in the reactor it don´t workUranium ore > Compressor > URanium Ingot + Cell > Uranium Cell
-
thx
pic for the bug:oh and it´s to much cooling, isn´t it ?
i put lava bukkets in, until i get damage from the reactor
then i put the near depletet isotope cell inside
but aftter 1 sec its finished
after 10 sec it is colled down because off the cooling -.- -
Display More
thx
pic for the bug:oh and it´s to much cooling, isn´t it ?
i put lava bukkets in, until i get damage from the reactor
then i put the near depletet isotope cell inside
but aftter 1 sec its finished
after 10 sec it is colled down because off the cooling -.-Stop using TMI'd items for bugtests, seriously.
TMI will give you FULLY REFINED depleted cells
Or give yourself a few "near-depleted uranium cells" (the ones with a slight green filling), mix it with coaldust, then you will get an unrefined one. -
dunno where else to put this but I wanted to clarify something. Can I use blocks of water around the reactor it self to cool down the reactor (like the old reactor in IC1)
And if I can do that is there anything i need to do to set up a Mark 1 or Mark 2 reactor to get passive cooling from blocks of water around the reactor?
I like the realism this brings but I dont wanna rush into making a power plant and have a huge meltdown
-
RTFM
http://forum.industrial-craft.…?page=Thread&threadID=446
QuoteLastly, the most underestimated Coolant System: The reactor itself
Folloring the basic laws of heat distribution, a rector will emit heat to it's surrounding. Each cubic meter (block) of air surrounding the reactor in a 3by3 sphere, will provide 1/4th of cooling. As well, water will provide a full point of cooling each. As well, the Reactor itself can vent 1 heat per pulse into the world by itself. Additionally Reactor Chambers possess intern heat vents, each chamber emitting additional 2 heat per pulse.
The sum of all these fators is called "Outward cooling". -
ok now it takes much much longer
But here the next problem xD
i can´t get the Electrolyzer to work
i place it next to a fully filled batbox place some (not using tmi) water cells on the left slot and wait.
but nothing happens -
Its not intended to work with batbox. Just with MFE/MFSU
-
of course i tried it with that too
but it doesn't work -.-
i place it next to a MFSU (but not at the ouput side), then i put a water cell inside (not using tmi for the water cell)
What have i done wrong ? -
of course i tried it with that too
but it doesn't work -.-
i place it next to a MFSU (but not at the ouput side), then i put a water cell inside (not using tmi for the water cell)
What have i done wrong ?Is the MFSU charged to at least 70%? Otherwise the electrolyzer wont drain power.
-
the mfsu was full
-
i just found out that the bug with the flowing water makes problems on a non-ic bukkit server too
-
i just found out that the bug with the flowing water makes problems on a non-ic bukkit server too
That doesn't exactly make sense. I've found and fixed the bug within the IC² files.Mind providing some screenshots from your setup?
-
when you jump into the water, you can't swim up
-
I've meant your MFSU setup.
As stated, the water bug is fixed for the 1.0 release. -
ok now its working Oo
maybe the problem was that i placed the Electrolyzer after the mfsu was full in my last try
that´s my (working) setup right now:But i found another bug
geothermal generator + shift + 64 Lava Cells = Saving Chunks -
Known Bugs: Shift-Clicking can cause crashes on some GUIs
-
i should read the know bugs thread ...
-
Shift-Clicking into GUIs of IC² can cause crashes.
Shift-Clicking can cause crashes on some GUIsits two times in the know bugs thread and i post it anyway
-
Shift-Clicking into GUIs of IC² can cause crashes.
Shift-Clicking can cause crashes on some GUIsits two times in the know bugs thread and i post it anyway
It's fixed for 1.0, though :3
