Mark II Reactor?

1st Official Post

    Hi Guys
    So I loaded up TMI to play around with some reactor designs.
    This is what I came up with, If any one could help confirm my math that would be nice!


    It generates 100EU/t
    Efficiency of 3.33( maybe ?)


    I have that the uranium cells generate 176 heat/t.
    It is air cooled, so -5h/t
    -13h/t for reactor chambers and reactor
    -26h/t for coolant cells


    176-5-13-26=132h/t


    So this heat should be spread across the 26 coolant cells and 10 HD's meaning,


    132/36 = 3.6 heat / pulse culminated. Thus they should decrease faster then my uranium.
    This doesn't happen.



    In this thread,
    http://forum.industrial-craft.…?page=Thread&threadID=463


    Alblaka, said he found a bug with Reactor Plating, does this also mean the same bug exists in the HD's?


    If so ignore this thread, if not am I missing something?

    • Official Post

    Looks like the middle coolant cells (row 2 column 5 and row 5 column 5) aren't going to be dispersed quickly enough. With only one target, their adjacent uranium cells will output 10 heat to them, while the disperser blocks can only pull 6 heat per pulse from each neighbor.


    Edit: But I'm simulating the fixed values. To answer your concern, yeah I believe the dispersers are affected by the bug he mentioned.