So you basically spend all these resources, duration restricted turbines, infrastructure, server load to produce a net 3801EU/t ?????
Actually 30 000 - 13 200 = 16 800 eU/t ≈ 16k eU/t (with all losses), plus additional 58.5 B of plasma per hour (≈ 3 300 eU/t).
And that is only T1 Fusion.
but perhaps there are other practical alternatives.
T2 Deuterium + Beryllium = 179 k eU/t
Ah ha, thanks for clearing that up. I guess it's up to me to create the config I want XD. Boo hard coded stuff :(. Not a fan of gating the mod behind hours and hours of waiting for the Bronze Blast Furnace to smelt steel or alternatively dumping thousands of bronze on multiple furnaces. On another note, can the Blast Furnace be fed by pipes or a hopper? Can they be emptied like that?
You can use blocks of iron/coal at once. That is not faster, but more material at once in the BBF. Then you should then go as fast as possible towards the EBF.
http://ftb.gamepedia.com/Fusion_%28Greg…#Fusion_Recipes
Up to 464k EU/t. In LargePlasmaGen with 140% efficiency 650kEU/t.
or alternatively dumping thousands of bronze on multiple furnaces.
Not dumping. Later you can take all materials back with Arc Furnace.
T2 Deuterium + Beryllium = 179 k eU/t
I saw the He3+D recipe since He is available from D+T. Not sure if the numbers work out though.
I also saw that one as the other viable one but idk how many ender lillies I'd need to keep up with fuel production like that...
Also apparently when a fusion reactor multiblock becomes un-multiblocked it loses it's internal EU storage. I figured it would be stored in the main block much like maintenance. I had some insult added to injury when I saw my 160 MEU voided after pulling a bonehead move and blowing up 2 dozen LuV casings and half a dozen superconducting coils.
Wow. A nice surprise when I refinished the multiblock: it does in fact store the EU in the main block but just doesn't display it unless it's complete. I'm a happy camper.
Up to 464k EU/t. In LargePlasmaGen with 140% efficiency 650kEU/t.
BTW, Blood. What does numbers on Large TSteel Turbine means? Does 30000 eU/t already including 140% efficiency or i should multiply 30k x 140%? And which dynamo hatch should i use than?
PS
Add chromium recipe to fusion wiki please.
PPS
Why don't use word "rotor" for turbine item?
BTW, Blood. What does numbers on Large TSteel Turbine means? Does 30000 eU/t already including 140% Efficiency or i should multiply 30k x 140%? And which dinam
The efficiency get't added later, so a 30k EU turbine rotor produces 42k at 140%.
Also the turbines will change a bit in the calculation soon. The max will be higher, but material combinations that are most efficient will also change. Pyure is currently doing the last few fixes on that.
Also when someone says: "Far to low output for the large gens, compared to the reactor". Who needs 650kEU/t? I expect that running for something like 1/4 of the time and storing the plasma for later.
PS
Add chromium recipe to fusion wiki please.PPS
Why don't use word "rotor" for turbine item?
Everyone can add infos to the wikipages. There is not even programming knowlage needed... I do not have the time to do everything.
The renameing will also happen in the turbine changes.
I also saw that one as the other viable one but idk how many ender lillies I'd need to keep up with fuel production like that...
Few veins of beryllium and you will have lots of fuel.
There must be a layer of bricks under the wood. Then every layer of wood must be surrounded by dirt. On top of the wood there must be dirt/grass with the igniter in the center(same level as the igniter). The Igniter starts automatic when everythingis placed correct! i once forgot to place 1 dirt and had to remove the whole pit...no fun
@all/ blood How long does a fullsize pit take to convert to charcoal? I mademy first 11x11x5 pit and it ignites, but doesnt stop. It runs for 5 realtime hours...i think thats wrong?
I've done this to the dot and it's still not working 
I've no doubt done something wrong.
Top layer (11x1x11): dirt, with the igniter in the middle
Middle layer (11x1x11): logs (BOP fir logs)
Bottom layer (11x1x11): bricks
Each layer is surrounded by dirt.
Middle layer (11x1x11): logs (BOP fir logs)
Mod wood currently not supported. Only Vanilla logs.
While we are missing wiki article, could some make small description of building Pyrolyse Oven?
To my shame I can't get controller block to believe that structure is completed. Am I missing something here? http://imgur.com/y7qGB7e
The efficiency get't added later, so a 30k EU turbine rotor produces 42k at 140%.
So my large plasma turbine with large tsteel rotor supplying with 7 L/t of helium plasma can produce 7*4096*1.4 = 40 k eU/t? And it can output only 32k eU/t thru LuV Dynamo hatch, right?
So am i need to use ZPM Hatch?
While we are missing wiki article, could some make small description of building Pyrolyse Oven?
To my shame I can't get controller block to believe that structure is completed. Am I missing something here? http://imgur.com/y7qGB7e
Seems ok with the basic blocks. The blocks around the coils will have outputs, maintainance and energy. The center 3x3 on the top has muffler and inputs.
So my large plasma turbine with large tsteel rotor supplying with 7 L/t of helium plasma can produce 7*4096*1.4 = 40 k eU/t? And it can output only 32k eU/t thru LuV Dynamo hatch, right?
So am i need to use ZPM Hatch?
Yes, ZPM Hatch.
you wouldnt be perchance talking about lag spikes when opening the ME interface / ME Crafting interface, would you?use i ran into that issue myself. it was binnies mods. cant quite remember what i did to fix it...
but you would have a stable working ME system for an hour or so, then open a AE terminal and boom tps drops to 0 for like 10-20 seconds...
We just saw that there's nearly 1800 princesses in the ae2 storage from an ender quarry. That's a shit ton of metadata...
I'll get back to you on whether this was is the lag source.
Seems ok with the basic blocks. The blocks around the coils will have outputs, maintainance and energy. The center 3x3 on the top has muffler and inputs.
After I put whole structure together, neither controller block recognize it nor most hatches and buses (i.e. they do not change their texture).
After I put whole structure together, neither controller block recognize it nor most hatches and buses (i.e. they do not change their texture).
Wait... the controller does look like a EBF or a multi smelter, but not like the pyrooven.
Wait... the controller does look like a EBF or a multi smelter, but not like the pyrooven.
My bad, was experimenting on other multiblocks trying to figure out the issue with Pyrolyse Oven and accidentally put wrong one.
Sadly, that's not the issue. Even after finishing whole structure and putting all required hatches and buses it still looks like this. http://imgur.com/Pmec5iZ
Hmm, just a guess, but try to build it in other directions. Try all ways North, West, East and south. Thats what i did not test by myself. My dev server is currently not compiling because of forestry update not done.
Tried that, doesn't help.
I did noticed something weird however. I replaced all bottom blocks with the same MV Output Buses. As you could see some of them change texture (I guess that means their are being "accepted" into multiblocks structure) and some do not.
In case, it is not build over chunks boarder and I've tried building it in 4 different chunks.
http://imgur.com/FdGFcxa
