I just ran into the craziest issue
I have a 5X5 reactor, on the S side, I have 2 power plants
Each one consists of
2 heat exchangers, powering 1 steam generator, feeding two turbines with a condenser on the last turbine, fluid ejectors in all of them
it works as it should, condensation gets sucked up out of the last turbine by the condenser, and some how by osmosis, it migrates it back up the chain to the steam generator
the closed loop works, aside from some gradual loss, which is realistic.
Ok now on the W side, I duplicated the set up for 2 more power plants (800 Hu reactor)
all should be well right?
But it isn't, the condensers are not working, the end turbines fill up with water and shut down, the front turbines remain water free.
I have double checked that I have all blocks facing the correct way except the condensers which don't appear to be turnable as if I wrench them, they just break regardless of what side I wrench,and everything, made sure they have the correct parts in them etc.
It is set up exactly how the S side is, but does not work.
I have even torn it all apart and rebuilt it, but it does the same thing.
Do they only work aligned N and S or something?