rick why do you still let people post here? can't you have it rigged so your the only one who can post in this thread?
I guess he cant, because he must be an Admin to add Stuff into locked Threads. Also there is no option for that.
A list of good reactor designs (IC² v1.103 and earlier)
-
-
in that case can we get a licence to flame i wanna go n00b hunting/jk
-
like i said license to flame plz. they are posting like this because there is no consequence for their behavior.
or its the planning tools fault in which case you should migrate all of the designs to screen shots and hope the n00bs never find out about the planning tool
-
YOU FAILED AGAIN, EVEN I KNOW THAT!!! You are not allowed to add Waterbuckets or Iceblocks into the Scheme, read the RULES BEFORE POSTING.
I know
-
What are you looking for to help fill out the blank positive breeder section? If I know what you are looking for I can whip something up and help fill some holes.
I had posted a couple hybrid positive breeder/ producer designs. I was hoping these fit the bill, but despite lack of negative feedback they did not get added.
Another I plan on using soon:
Breeder 1: Mark V - Positive Breeder
Heating configuration (with timing): Same config. 22 total minutes, but at 18 minutes switch the cooler cells with the hotter ones near the uranium, or add brief 1s off heat distribution cycles.
Breeder efficiency: 0.89
Efficiency: 3.67
Eu/tick: 330 Eu/t
Effective eu/t: 55.6 Eu/t at 6s on 29s off, 55 Eu/t at 1s on 5s off
Cost: Copper 274, Tin 142, Bronze 119, Iron 212
Credits: Gorzak -
-
Without moving the Uranium I can get to this...
-
Without moving the Uranium, this reactor does not belong here.
Rules:
-No useless eff 1, low eu/cost etc. I want this list to contain high quality reactors that have been properly designed. -
Rick you should add a spoilered "wall of shame" section to the list for the worst designs that people have tried to post here. and add very strong language about how these designs are crap
-
http://www.talonfiremage.pwp.b…dmetgag9fayoeyx2sh5fexqtc
This is a medium efficiency medium-high EU MK-II reactor that I thought MIGHT be worth having a spot. I'll let others be the judge of that.
http://www.talonfiremage.pwp.b…m33hubo4pwptsslx3c5xc</a>I've been trying to get a good six chambered MK I reactor, but that was the closest I could get. It's, ok, I guess, but whether it's worth having a spot is your decision.
-
trust me they won't be considered and here is why (in a caps just to make it clear)
YOU DIDN'T COMPARE THEM TO THE REACTORS ALREADY ON THE DAMN LIST!!!
making this list is not easy its not something that can be done by playing with the planner for a minutes or even a few hours and if you didn't take the time to check what reactors already made the list then you deserve what ever hate and flame gets sent your wayhttp://www.talonfiremage.pwp.b…dmetgag9fayoeyx2sh5fexqtc
This is a medium efficiency medium-high EU MK-II reactor that I thought MIGHT be worth having a spot. I'll let others be the judge of that.
trumped by this one http://www.talonfiremage.pwp.b…=1o10101001501521s1r11r10 (you can build 2 with the same amount of resources)
http://www.talonfiremage.pwp.b…m33hubo4pwptsslx3c5xc</a>I've been trying to get a good six chambered MK I reactor, but that was the closest I could get. It's, ok, I guess, but whether it's worth having a spot is your decision.
trumped by this one http://www.talonfiremage.pwp.b…=1k10101001501521s1r11r10 (virtually the same but cheaper and faster cool down)
and this one http://www.talonfiremage.pwp.b…1k101010037ps011111101110 (still cheaper and more efficient) -
No need to be so angry. I did f***ing compare them to other reactors. I tried, I fucking TRIED, but I wasn't going to spend the time to look at every single reactor in the entire list to see if any of them beat mine. I looked at a couple and I thought "I'm not confident about this, but I might as well try." HEY, HERE'S A SUGGESTION. Maybe if all you stopped yelling and screaming because a person missed a few reactors that trumped theirs, scaring away prospects, maybe we'd get some better reactors in here. Maybe it would be a better community effort. But all you elitist bastards go all caps and scream and yell and cry at everyone who makes a mistake.
I didn't put all my effort into it because I knew this would happen no matter how hard I tried.
Here, here is what you look like:
Player: Oh hey, I think I could take a stab at this... *makes a reactor*, eh, it's ok, I think it's the best I could come up with. It's worth a shot! *posts*Elitist: HEY F*** YOU YOU IDIOT DON'T YOU SEE THIS ONE REACTOR ON THE LAST PAGE OF THE FORUM IS BETTER THAN YOURS IN EVERY WAY. YOU ARE F***ING PATHETIC PLEASE LEAVE THIS PLACE.
That's my 2 cents. Take it into consideration.
-
Consideration noted and thank you for your efforts I apologize for blowing up at the first guy for the last 10+ pages who spent more than 10 minutes designing his reactor/read the first post. But really unless new content is added experimenting with reactors has passed a point of diminishing returns you either need to expend a lot of effort or get lucky. So what is happening is this thread is getting spammed by users who are basically hoping they get lucky. Again I am sorry I let my emotions on the matter get ahead of me.
-
http://www.talonfiremage.pwp.b…ltlu1e3e5ifyf1ry0bxvnqhvk
Mark 1-O
Efficiency 1.5
120eu/t -
Um hi everyone!
If anyone is looking for a breeder that charges 4 empty cells and can only be used for a full cycle before cooldown, here is 2 i made!
Hope they help and fill in some spots on the list.
Both designs use only 2 reactor blocks, it can be increased to reduce cooldown but at a cost of recharging 1 to 2 cells.
Using only 1 uranium cell
http://www.talonfiremage.pwp.b…mlvzz6izkh4c2e7bzejd4epds
Using 2 uranium cell
http://www.talonfiremage.pwp.b…nnizt80hfnjpt2r8k3s64tp1c
Might be one of the cheapest breeders out there. -
Consideration noted and thank you for your efforts I apologize for blowing up at the first guy for the last 10+ pages who spent more than 10 minutes designing his reactor/read the first post. But really unless new content is added experimenting with reactors has passed a point of diminishing returns you either need to expend a lot of effort or get lucky. So what is happening is this thread is getting spammed by users who are basically hoping they get lucky. Again I am sorry I let my emotions on the matter get ahead of me.
Thats true alot of time and effort went into the current list. As a result of this the designs on the list may very well be the best ones you can make with current components.
Iam going on vacation this friday and i will be gone for 4 weeks. Maybe someone else can take it over from me during that time.
-
http://www.talonfiremage.pwp.b…ltlu1e3e5ifyf1ry0bxvnqhvk
Mark 1-O
Efficiency 1.5
120eu/tNice one, took me 5 minutes of hard work to make it better. http://www.talonfiremage.pwp.b…lg355ydmo8kiem9mcyq4uc0g0
-
Mark 1-0
130 eu/t
infinite cycleshttp://www.talonfiremage.pwp.b…esrlgojcal7rbk4wjj2v480g0
I believe this is the best possible mark 1 setup but i am not sure. I will try to make a better one in the next 20 minutes, if I manage it I will post again,
This took me quite a while as i also tested it to make sure it works.Started from complete scratch!
materials needed:
13 uranium cells
12 integrated heat dispersers
27 coolant cells
Maximum size nuclear reactorExternal enviroment:
20 water blocks -
