I have already finished the Code for my own Fusionreactor, and its working with 1.3.2 (and that without needing an IC²-Update)
So here the Mechanics of it:
= Fusioncontrolcomputer (will may consume a RP-Computercore instead of the Circuit, if installed)
= Fusioncoil, just a stupid Block, which does nothing by itself, but is needed for the Controlblock.
. Shape of the Fusionreactor (Horizontal!!!)
. = Fusioncontrolcomputer
. = 24 Fusioncoils placed around the Controlblock
. = Nothing
:Tesla Coil: :Intergrated Plating: :Intergrated Plating: :Intergrated Plating: :Tesla Coil: :Tesla Coil: .
:Intergrated Plating: :Tesla Coil: :Tesla Coil: :Intergrated Plating: :Tesla Coil: :Tesla Coil: :Intergrated Plating: .
:Intergrated Plating: :Intergrated Plating: :Tesla Coil: :Tesla Coil: :Tesla Coil: :Intergrated Plating: :Intergrated Plating: .
It will need 10000000EU (a full MFSU!) to start running, so try to keep the Fuel for the Reaction up as long as possible. It will also charge itself until it has 10000000EU for another Reaction, before it outputs anything. The Reactor itself can hold 20000000EU before you lose any Energy due to overfilling the Storage, and will output either 4096EU/t if Storage is over 10000000EU, or 2048EU/t (4096EU/t at a rate of one Pulse per 2 Ticks) if you collect the EU from the Reaction directly.
Energyinput is on the 2 Glasssides (You need to connect only one of these with your Inputcable!), Energyoutput (where you put your 2 HV-Transformers) is on the 2 HV-Output-Facings. The Top with the Computer is for autofilling the Topslot, while the GregTech-Logo on the bottom is for the autofilling of the Bottomslot (So you may need at least one Automatiomod like Redpower). For Retrieving the He-Cells just put your Tubes/Filters on the last remaining Side.
To Fuel it you need one Tritiumcell (T-Cell) and one Deuteriumcell (D-Cell). These will last for 1024Ticks * 2048EU/Tick = 2097152EU!!! It doesnt matter, which Inputslots you choose for T-Cells or D-Cells, as long as one contains the T-Cell-Stack and the other one the D-Cell-Stack.
But how to get those Cells, well here is the simple Productionchain for it.
Electrolyzed Watercell + Extractor = Hydroniumcell (H-Cell)
4 * H-Cell + Extractor = D-Cell
4 * D-Cell + Extractor = T-Cell
You will need 20 H-Cells to run one Fusioncycle, and since they need Electrolyzed Watercells, you have to use large amounts of Electrolyzers. (enough to produce one Electrolyzed Cell per 2 Seconds)
Such a H-Cell has also other purposes. You can for example, use it inside a Generator to get 30000EU! But you will lose your Tincell. (Thats like burning Tin for EU).
But thats not all about those Cells! There is also a Heliumcell (He-Cell), which you will get as byproduct of the Fusionreactor, to burn it for additional 100000EU inside a Generator! (If you got another idea for a Purpose of it, other than making Balloons with it, then tell it me)
This will be the most awesome Fusionreactor of all the IC²-Addons!