Here is my attempt to make turbine block.
Botton row are two liquid heat exchangers. Between them is steam generator which send steam to two kinetic steam turbines. Each turbine have attached one generator. The fluid regulator is pointed downward. When you put ejector update to condenser, turbine and heat exchanger you can easily attach it to side of the reactor. Also it works only with distilled water as water condensed inside the turbines are returned directly to steam generator. If you put water to steam generator it becomes blocked.
Only problem with this setup is at start it blows some steam outside so sometimes you must refill your water.
replace the middle condencer with a fluid transport ( no need to condense) and set the boiler to 221 pressure and 1 mb water and it will always output superheated steam at 200 hu/t
its a long video but the one i did last night should show you how to setup the parts