In this thread we will (hopefully) create a "Machine Guide" for IndustrialCraft², but not in the sense of "Machine X is crafted using Y and turns Z into A", but like... Err... Did you read the OP of the SeedManager Addon with like "And then you have to pull this lever and push this button"? That's what I mean. And if you know how to describe it better, please reply and tell me.
But not only this User Manual part should be here, but also how the machines work. Did you read this thread about the teleporter or this little "discussion" about the extractor? If yes, you probably know what I mean. If not, read it. And if you still don't understand it, tell me and I'll try to explain it better.
To expand this guide, just post replies with what you want added. Preferably post it in the style the guide should be, but if you don't, I'll "translate" it. Inspiration for that style can be found in some of my suggestions, the OP of the SeedManager Addon, a copy of the old IC Minecraftforum OP if anyone has a copy of it and probably in some other places. If you want to be mentioned here, just ask for it.
The terms that are used here are from my language pack . Sources for my language pack are in the language pack's thread.
Well, I'll stop with spamming links now and start with the guide! Well, not with the guide itself, but you'll see in a few lines.
Industrial Craft Machine Corp User Manual
Hello, costumer!
That you read this user manual means that you bought the full packet of Industrial Craft Machine Corp's Industrial Machines. Before you operate them, please read this manual thoroughly to prevent harm to your posessions and you. Some of the machines are very dangerous and should only be operated by experts.
General
It is not possible to dismantle Industrial Craft Machine Corp Machinery without using proper tools.
A 100% chance to successfully dismount machines is granted solely to skilled Engineers.
We do not take responsibility for any machines lost from the improper handling of wrenches.
Stationary Machines
Maceratron-E-901™
Hello valued customer!
If you are reading this, then you have most likely just placed down your very own Maceratron-E-901™ and by reading this entry you are probably wondering, Almighty User Manual, how am I intended to work this monstrosity of raw grinding power? The answer is a simple 5 step process:
1. Insert the block you want to be completely pulverized to dust into the top slot
2. Connect a source of energy into the Maceratron-E-901™ using an Energy Transfer Cable N-x™, alternatively insert an T500-Rechargeable Energy Storation Unit™ other source of energy such as an Rechargeable Energy Storation Pack™ into the designated receptacle.
3. Switch the lever located on the side of the Maceratron-E-901™, to tap into the raw destructive force of 12 interlocking gears!
4. When the green LED glows, switch the lever again!
5. Open the side compartment on the side opposite of the lever and retrieve the macerated object from the side!
If you have tried it out, you may be wondering, but Almighty User Manual, what happened to the stone attached to the ore? Nobody knows, such is the brute power of the Maceratron-E-901™!
Disclaimer: Industrial Craft Machine Corp is not responsible for any injuries caused by the sticking of limbs inside the input hopper of the Maceratron-E-901™ or from any seizures resulting from the sheer HAYOness caused by retrieval of the macerated product
*Will be expanded when someone posts something for this section*
Portable Devices
*Will be filled when someone posts something for this section*
Machine Parts
*Will be filled when someone posts something for this section*
Encyclopedia of Industrial Craft Machine Corp Machinery
*Will be filled when someone posts something for this section*
Stationary Machines
*Will be filled when someone posts something for this section*
Portable Devices
*Will be filled when someone posts something for this section*
Machine Parts
*Will be filled when someone posts something for this section*
Thanks for reading!