[Addon 1.112] BuildCraft-IndustrialCraft Crossover Mod v2.0[SSP/SMP]

Vic3Dexe · Feb 18th 2012

Quote from silentdeth

found and mushed. Dare I ask why you were trying to power a wooden transport pipe?

Not quite sure what you mean... What am I supposed to power? I need to pump out items from IC2 machines and other stuff.

ps To reproduce the bug you can try a lever to activate the engine. Just switch it on/off quickly.

pps There is another bug - it seems, that engines limit an IC2-energy packet size.

To reproduce: put induction furnance and 10-12 small engines to 1 common wire (I took fiberglass). Engines must be not activated. Power source may be any (MFS-T2-T1 in my case). Then run a furnance and measure power on it. There are 12 engines on screenshots, and only 8 eu/t to furnance (must be 16), and only 8 taked from MFS, so the engines don't consume any eu.

img 1, power to furnance

Display Spoiler

img 2, state of the furnance, it shows the furnance don't have enough energy

Display Spoiler

img3, power taked from MFS, measurement is performed on fiberglass under crosshair

Display Spoiler

modloader.txt the same

WolfBrother · Feb 18th 2012

OK, so you have engines powering other engines, which themselves have nothing to work on.

Either your screenshots don't convey your actual setup, or you definitely don't understand how engines work. What is it you're trying to do there?

Vic3Dexe · Feb 18th 2012

I'm trying to say that no matter of what engines powering. They actually off (no redstone signal). The only 1 consumer is induction furnance. Why it receives only 8 eU/t (must be 16)?

When there are no engines powered from the same power line (or only 1 or 2), the furnance getting full power (16 eu/t).

Talonius · Feb 19th 2012

Quote from Vic3Dexe

I'm trying to say that no matter of what engines powering. They actually off (no redstone signal). The only 1 consumer is induction furnance. Why it receives only 8 eU/t (must be 16)?

When there are no engines powered from the same power line (or only 1 or 2), the furnance getting full power (16 eu/t).

It seems he's right, even though the engines are inactive and they're not consuming EU (after the capasitors are full). They're still somehow flagged as 'needing EU' thus the EU supply is split up and the induction furnace only gets a small share of the EU.

deleted-user · Feb 19th 2012

Whenever i open the petrochemical generator gui in smp , bukkit.
i crash , minecraft freezes and goes into blackscreen, whenever i open the gui from the petrochemical generator.
the error i fetched usen a batch file start:

Code

java.lang.IndexOutOfBoundsExeption: Index: 37, Size : 37 at java.util.ArrayList.RangeCheck(Unknown Source)
  at java.util.ArrayList.get(Unkown Source) at cx.b(SourceFile:80) at cx.a(SourceFile:233)
  at abm.a(NetClientHandler.java:854)
  at zn.a(SourceFile:42)
  at kp.b(Sourcefile:271)
  at abm.b(NetClientHandler.java:42)
  at iq.c(SourceFile:57)
  at net.minecraft.client.Minecraft.k(SourceFile:1598)
  at net.minecraft.client.Minecraft.x(SourceFile:709)at net.minecraft.client.Minecraft.run(SourceFile:662)
  at java.lang.Thread.run(Unknown Source)
Stopping!

Display More

Version info:1.18 both server as client

(Note : i typed the error , i had it on another screen, there might be a typo)
any help would be appreciated
also , ignore some of the lines behind behind eachother , i dunno what it is , but i cant force them in new lines

CiderCraft · Feb 19th 2012

Apologies if I've missed this being requested earlier, went through all 26 pages and didn't find it though.

Would it be possible to add a small* (possibly optional?) EU requirement to redstone engines, inline with the ratio of BCE:EU that other engines use? Trying to have a "nothing free, nothing with no real world equivalent**" game, and redstone engines are - while limited - free energy.

* Steam/Small electrics produce what, 1 BCE/tick? Maybe have redstones use 1 EU/cycle?
** Within the obvious limits of minecraft - not many creepers and dragons in England. None outside Parliament anyway...

Fantastic mod by the way, BC engines have been firmly relegated to ingredient only status now!

silentdeth · Feb 19th 2012

Quote from Vic3Dexe

Not quite sure what you mean... What am I supposed to power? I need to pump out items from IC2 machines and other stuff.

I mean you were using a wooden transport pipe, you need to use a wooden conductive pipe to transport energy.

Quote from Vic3Dexe

pps There is another bug - it seems, that engines limit an IC2-energy packet size.

To reproduce: put induction furnance and 10-12 small engines to 1 common wire (I took fiberglass). Engines must be not activated. Power source may be any (MFS-T2-T1 in my case). Then run a furnance and measure power on it. There are 12 engines on screenshots, and only 8 eu/t to furnance (must be 16), and only 8 taked from MFS, so the engines don't consume any eu.

img 1, power to furnance

Display Spoiler

img 2, state of the furnance, it shows the furnance don't have enough energy

Display Spoiler

img3, power taked from MFS, measurement is performed on fiberglass under crosshair

Display Spoiler

modloader.txt the same

Display More

ill look into it for the next version.

silentdeth · Feb 19th 2012

Quote from CiderCraft

Apologies if I've missed this being requested earlier, went through all 26 pages and didn't find it though.

Would it be possible to add a small* (possibly optional?) EU requirement to redstone engines, inline with the ratio of BCE:EU that other engines use? Trying to have a "nothing free, nothing with no real world equivalent**" game, and redstone engines are - while limited - free energy.

* Steam/Small electrics produce what, 1 BCE/tick? Maybe have redstones use 1 EU/cycle?
** Within the obvious limits of minecraft - not many creepers and dragons in England. None outside Parliament anyway...

Fantastic mod by the way, BC engines have been firmly relegated to ingredient only status now!

Display More

don't wish to change spacetoad's code in that manner. However, he has stated he plans to redo the redstone engines at some point. The equivalent EU usage for a redstone engine would be 0.125 EU/t.

CiderCraft · Feb 19th 2012

That's fine, I'll just stick with small electrics then. Might even motivate me to check out gates and use them to conserve EU.

Thanks for replying!

silentdeth · Feb 19th 2012

New versions posted.

Note IB has changed save format, be sure to read the changelog, especially the last item :).

streetstar5 · Feb 20th 2012

Quote from silentdeth

New versions posted.

Note IB has changed save format, be sure to read the changelog, especially the last item :).

I love you

Xeca · Feb 20th 2012

Question:
Any other way besides the zip name to force the add-on to load after IC? Nothing I do seems to get to load last.

Display Spoiler

FINER: Adding mods from /servers/empiregate/minecraft/mods/zBCIC2crossover server v1.24.zip
Feb 20, 2012 8:53:48 AM ModLoader readFromModFolder
FINER: Zip found.
Feb 20, 2012 8:53:48 AM ModLoader addMod
FINE: Failed to load mod from "mod_BCIC2Crossover.class"
Feb 20, 2012 8:53:48 AM ModLoader addMod
FINER: THROW
java.lang.NoClassDefFoundError: ic2/common/BlockMultiID
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631)
at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:283)
at java.net.URLClassLoader.access$000(URLClassLoader.java:58)
at java.net.URLClassLoader$1.run(URLClassLoader.java:197)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at java.lang.Class.getDeclaredFields0(Native Method)
at java.lang.Class.privateGetDeclaredFields(Class.java:2291)
at java.lang.Class.privateGetPublicFields(Class.java:2324)
at java.lang.Class.getFields(Class.java:1359)
at ModLoader.setupProperties(ModLoader.java:151)
at ModLoader.addMod(ModLoader.java:121)
at ModLoader.readFromModFolder(ModLoader.java:888)
at ModLoader.init(ModLoader.java:625)
at ModLoader.Init(ModLoader.java:1312)
at net.minecraft.server.MinecraftServer.s(MinecraftServer.java:103)
at net.minecraft.server.MinecraftServer.run(MinecraftServer.java:315)
at cz.run(SourceFile:465)
Caused by: java.lang.ClassNotFoundException: ic2.common.BlockMultiID
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
... 24 more
Feb 20, 2012 8:53:48 AM ModLoader ThrowException

Player · Feb 20th 2012

Add a lowercase z in front of the filename

silentdeth: You should consider implementing BaseMod.getPriorities().

MStef94 · Feb 20th 2012

Will it be ported to craftbukkit R4?

Geo Terra · Feb 20th 2012

Actually, it's not so much as this addon loading before or after IC, it should be loaded before Buildcraft (At least that was the case a version ago)

lutzee · Feb 20th 2012

Receiving the Same error of Crossover loading before IC2, but my version of Crossover the name of the zip is "zBCIC2crossover server v1.24.zip"
Any other reason why IC2 isn't loading before crossover? (IC2 Jar name is "industrialcraft-2-server_1.70b.jar")

FnordMan2 · Feb 20th 2012

Quote from Xeca

Question:
Any other way besides the zip name to force the add-on to load after IC? Nothing I do seems to get to load last.

Quote from lutzee

Receiving the Same error of Crossover loading before IC2, but my version of Crossover the name of the zip is "zBCIC2crossover server v1.24.zip"
Any other reason why IC2 isn't loading before crossover? (IC2 Jar name is "industrialcraft-2-server_1.70b.jar")

Both of you: What OS are you running? ModLoader/ModLoaderMP should sort themselves but at least in the case of Linux MLMP stopped doing such again.
There's an "interesting" workaround involving dd and creating a small fat32 filesystem if you've got root permissions (as one needs to mount said filesystem)

silentdeth · Feb 20th 2012

Quote from Player

Add a lowercase z in front of the filename

silentdeth: You should consider implementing BaseMod.getPriorities().

I do, have, it doesn't work on servers it seems, maybe the forge version of modloader breaks something? I don't know. Also you'll note there is a z in front of the file name.

silentdeth · Feb 20th 2012

hotfix posted for liquid containers.

Bukkit version has also been updated.

For Linux load order issues you can try change the file dates or putting BC/IC2 into the jar.

THE_BOOMZ · Feb 20th 2012

I Just thought I would pop in to make a suggestion (I don't know if it has been asked before). would it be possible to add support for the use of bio-fuel (refined bio-mass) from the forestry mod in petrochemical generators? (I realize that would mean that they are no longer true petrochemical generators).

It would help me out a lot.

[Addon 1.112] BuildCraft-IndustrialCraft Crossover Mod v2.0[SSP/SMP]

Share

Users Viewing This Thread